The Haas Automation TL-1-EDU is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 1,800 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas TL-1-EDU toolroom lathe: 16 in (406 mm) turning diameter, 30 in (762 mm) Z travel, 10 hp belt-driven spindle, 1,800 rpm, single-phase option.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 1,800 RPM |
| Spindle Motor Rating | 10.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 4,900 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Swing Over Front Apron | 20 in (508 mm) |
| Swing Over Cross Slide | 11 in (279 mm) |
| Chuck Optional | 8 in (203 mm) |
| Max Turning Diameter | 16 in (406 mm) |
| Max Turning Diameter With 4 Station Turret | 8 in (203 mm) |
| Max Turning Length | 30 in (762 mm) |
| Max Turning Length Varies With Workholding | 30 in (762 mm) |
| X-Axis Travel | 8 in (203 mm) |
| Z-Axis Travel | 30 in (762 mm) |
| Rapid Traverse | 450 ipm (11.4 m/min) |
| Max Thrust X | 3,894 lbf (17,321 N) |
| Max Thrust Z | 1,947 lbf (8,661 N) |
| Spindle Nose | A2-5 |
| Spindle Drive | Direct Speed, Belt Drive |
| Spindle Motor Power | 10 hp (7.5 kW) |
| Max Spindle Speed | 1,800 rpm |
| Spindle Torque | 108 ft-lbf @ 355 rpm (146 N·m @ 355 rpm) |
| Spindle Bore | 2.3 in (58 mm) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Single Phase | 220 VAC 1-phase, 40 A |
| Electrical Low | 220 VAC 3-phase, 25 A |
| Electrical High | 440 VAC 3-phase, 13 A |
| Shipping Domestic Pallet | 92 × 69 × 87 in (234 × 175 × 221 cm) |
| Shipping Export Pallet | 92 × 69 × 87 in (234 × 175 × 221 cm) |
| Machine Weight | 4,900 lb (2,230 kg) |
Haas Automation publishes a list price of US$32,995 for the Haas TL-1-EDU (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-tl-1-edu#price; the request is passed to Haas Automation or an authorised dealer.
In the headline figures, none. Both list a 16 in (406 mm) maximum turning diameter, 30 in (762 mm) of turning length and Z travel, 8 in (203 mm) of X travel, an A2-5 nose with a 2.3 in (58 mm) bore, 10 hp (7.5 kW), 1,800 rpm and 108 ft-lbf (146 N·m) at 355 rpm. The table does not describe what the EDU designation changes, so ask Haas what is supplied and who can order it.
There are three supply choices: 220 VAC single-phase at 40 A, 220 VAC three-phase at 25 A, or 440 VAC three-phase at 13 A. Compressed air is needed at a minimum of 80 psi (5.5 bar), and the inline hose and coupler are both 3/8 in.
Machine weight is 4,900 lb (2,230 kg). The domestic and export pallets are the same size, 92 × 69 × 87 in (234 × 175 × 221 cm). Those are the shipping dimensions and not the installed floor space, so use them for doorways and rigging and ask Haas for the layout drawing.
Maximum spindle torque is 108 ft-lbf (146 N·m) at 355 rpm from a 10 hp (7.5 kW) belt-driven spindle. Maximum thrust is 3,894 lbf (17,321 N) on the X axis and 1,947 lbf (8,661 N) on the Z axis. Both axes rapid at 450 ipm (11.4 m/min).
Maximum turning length is 30 in (762 mm), the same as the Z travel. The table marks this figure as varying with workholding, so a chuck, long jaws or a centre reduce the usable length. An 8 in (203 mm) chuck is listed as an option.
