The Haas Automation TL-1P is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 3,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas TL-1P toolroom lathe: 3,000 rpm spindle, 6.5 in (165 mm) chuck, 8 in (203 mm) turning diameter, 30 in (762 mm) between centers.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,000 RPM |
| Spindle Motor Rating | 10.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Swing Over Front Apron | 20 in (508 mm) |
| Chuck Size | 6.5 in (165 mm) |
| Max Turning Diameter | 8 in (203 mm) |
| Max Turning Length | 30 in (762 mm) |
| Distance Between Centers | 30 in (762 mm) |
| X-Axis Travel | 8 in (203 mm) |
| Z-Axis Travel | 30 in (762 mm) |
| Rapid Traverse | 450 ipm (11.4 m/min) |
| Max Thrust X | 3,894 lbf (17,321 N) |
| Max Thrust Z | 1,947 lbf (8,661 N) |
| Spindle Nose | A2-5 |
| Spindle Drive | Direct Speed, Belt Drive |
| Spindle Motor Power | 10 hp (7.5 kW) |
| Max Spindle Speed | 3,000 rpm |
| Spindle Torque | 108 ft-lbf @ 355 rpm (146 N·m @ 355 rpm) |
| Spindle Chuck Throat | Ø 1.81 in × 3.1 in DEEP (Ø 46 mm × 78.7 mm DEEP) |
| Spindle Drawbar Bore | Ø 1.03 in × 4.91 in DEEP (Ø 26.2 mm × 124.7 mm DEEP) |
| Spindle Bore | 2.3 in (58.4 mm) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Single Phase | 220 VAC 1-phase, 40 A |
| Electrical Low | 220 VAC 3-phase, 25 A |
| Electrical High | 440 VAC 3-phase, 13 A |
| Shipping Domestic Pallet | 89 × 66.5 × 83 in (226 × 169 × 211 cm) |
| Shipping Export Pallet | 89 × 66.5 × 83 in (226 × 169 × 211 cm) |
| Shipping Domestic Pallet With Conveyor | 121 × 70 × 83 in (307 × 178 × 211 cm) |
| Shipping Export Pallet With Conveyor | 121 × 70 × 83 in (307 × 178 × 211 cm) |
| Machine Weight With Conveyor | 4,620 lb |
Haas Automation publishes a list price of US$53,995 for the Haas TL-1P (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-tl-1p#price; the request is passed to Haas Automation or an authorised dealer.
Speed and diameter. The TL-1 has a 1,800 rpm spindle and a 16 in (406 mm) maximum turning diameter. The TL-1P has a 3,000 rpm spindle, an 8 in (203 mm) maximum turning diameter and a 6.5 in (165 mm) chuck in its table. Travels of 8 in in X and 30 in (762 mm) in Z, the A2-5 nose, 10 hp (7.5 kW) and 108 ft-lbf (146 N·m) at 355 rpm are common to both.
The table lists a 6.5 in (165 mm) chuck. The chuck throat is 1.81 in (46 mm) in diameter by 3.1 in (78.7 mm) deep, and the drawbar bore is 1.03 in (26.2 mm) in diameter by 4.91 in (124.7 mm) deep. The spindle bore is 2.3 in (58.4 mm), but stock held in this chuck is governed by the throat and drawbar figures.
Z travel and the distance between centers are both 30 in (762 mm), and the table gives 30 in as the turning length that varies with workholding. The chuck, its jaws and any centre take length out of that, so measure the setup you intend to use against the 30 in figure.
Electrical supply is 220 VAC single-phase at 40 A, 220 VAC three-phase at 25 A or 440 VAC three-phase at 13 A. Air supply must be at least 80 psi (5.5 bar), and the inline hose and coupler are 3/8 in.
The TL-2P is the longer machine, with 48 in (1,219 mm) of Z travel and turning length against 30 in (762 mm) of Z travel on the TL-1P. Chuck size of 6.5 in (165 mm), the 8 in (203 mm) maximum turning diameter, the 3,000 rpm top speed and the 10 hp (7.5 kW) spindle are the same on both.
