The Haas Automation TL-3 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 2,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas TL-3 toolroom lathe: 29 in (737 mm) swing, 63 in (1,600 mm) between centers, 30 hp spindle, 4.62 in bore and 4 in (102 mm) bar capacity.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 2,000 RPM |
| Spindle Motor Rating | 30.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Swing Over Front Apron | 29 in (737 mm) |
| Swing Over Cross Slide | 14 in (356 mm) |
| Chuck Optional | 16 in (406 mm) |
| Max Swing | 29 in (737 mm) |
| Max Turning Diameter | 29 in (737 mm) |
| Max Turning Diameter With Bot Turret | 21 in (533 mm) |
| Max Turning Diameter With Tool Post | 29 in (737 mm) |
| Max Turning Length | 62 in (1,575 mm) |
| Max Turning Length With 8 Station Turret | 62 in (1,575 mm) |
| Bar Capacity | 4 in (102 mm) |
| Distance Between Centers | 63 in (1,600 mm) |
| X-Axis Travel | 16 in |
| Z-Axis Travel | 63 in (1,600 mm) |
| Max Thrust X | 5,600 lbf (24,910 N) |
| Max Thrust Z | 5,100 lbf (22,686 N) |
| Spindle Nose | A2-8 |
| Spindle Drive | Direct Speed, Belt Drive |
| Spindle Motor Power | 30 hp (22.4 kW) |
| Max Spindle Speed | 2,000 rpm |
| Spindle Torque | 300 ft-lbf @ 500 rpm (407 N·m @ 500 rpm) |
| Spindle Bore | 4.62 in (117.3 mm) |
| Tailstock Taper | MT5 |
| Tailstock Manual Quill Travel | 7 in (178 mm) |
| Turret Stations | 8 BOT |
| Turret Index Time | 1 s |
| Turret Boring Bar Rear Clearance | 1.65 in (41.8 mm) |
| Turret Boring Bar Rear Clearance From Turret Face | 5.27 in (133.9 mm) |
| Turret Tooling | BOT |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 70 A |
| Electrical High | 440 VAC 3-phase, 35 A |
Haas Automation publishes a list price of US$59,995 for the Haas TL-3 (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-tl-3#price; the request is passed to Haas Automation or an authorised dealer.
It is 29 in (737 mm) with a tool post and 21 in (533 mm) with the BOT turret. Swing over the front apron is 29 in and swing over the cross slide is 14 in (356 mm), so a long part that extends over the slide is limited to the smaller swing. Maximum turning length is 62 in (1,575 mm).
The TL-3 has an A2-8 nose, a 4.62 in (117.3 mm) bore, 4 in (102 mm) of bar capacity, 30 hp (22.4 kW), 300 ft-lbf (407 N·m) at 500 rpm and 2,000 rpm. The TL-3B has a 7.08 in (179.8 mm) bore, 7 in (178 mm) of bar capacity, 40 hp (29.8 kW), 1,400 ft-lbf (1,898 N·m) at 150 rpm and 1,300 rpm. Turning length is 62 in (1,575 mm) on both.
The TL-3P runs to 2,400 rpm and lists 60 in (1,524 mm) of turning length. The TL-3 runs to 2,000 rpm and lists 62 in (1,575 mm). Both have a 29 in (737 mm) swing, a 4.62 in (117.3 mm) bore, 4 in (102 mm) of bar capacity and a 30 hp (22.4 kW) spindle with 300 ft-lbf (407 N·m) at 500 rpm.
An MT5 tailstock with a manual quill that travels 7 in (178 mm). Distance between centers is 63 in (1,600 mm) and Z travel is 63 in. The table gives no tailstock thrust figure, which fits a hand-fed quill, so tailstock drilling depends on the operator.
The table lists 220 VAC three-phase at 70 A or 440 VAC three-phase at 35 A. Minimum air pressure is 80 psi (5.5 bar), and the inline air hose and coupler are 3/8 in. No single-phase supply is listed for this model.
