The Haas Automation TM-0 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas TM-0 toolroom mill: 20 x 12 x 16 in (508 x 305 x 406 mm) travels, 4,000 rpm 40-taper spindle, 7.5 hp, runs on single-phase 220 VAC.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 7.5 kW |
| Spindle Taper Interface | CT or BT 40 |
| Table / Platter / Chuck Size | 38.4 × 10.5 in (975 × 267 mm) |
| Max Table Load Capacity | 350 kg |
| Approx. Machine Weight | 3,660 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 20 in (508 mm) |
| Y-Axis Travel | 12 in (305 mm) |
| Z-Axis Travel | 16 in (406 mm) |
| Spindle Nose To Table Max | 20 in (508 mm) |
| Spindle Nose To Table Min | 4 in (102 mm) |
| Spindle Motor Power | 7.5 hp (5.6 kW) |
| Max Spindle Speed | 4,000 rpm |
| Spindle Torque | 33 ft-lbf @ 1,200 rpm (45 N·m @ 1,200 rpm) |
| Spindle Drive | Direct Speed, Belt Drive |
| Spindle Taper | CT or BT 40 |
| Spindle Bearing Lubrication | Grease Packed |
| Spindle Cooling | Air Cooled |
| Table Size | 38.4 × 10.5 in (975 × 267 mm) |
| Table Work Area Length | 30.5 in (775 mm) |
| T Slot Width | 0.626 in to 0.63 in (15.9 mm to 16 mm) |
| T Slot Center Distance | 4 in (102 mm) |
| T Slots | 3 |
| Max Table Load | 350 lb (159 kg) |
| Max Cutting Feedrate | 200 ipm (5.1 m/min) |
| Rapid Traverse | 200 ipm (5.1 m/min) |
| Max Thrust X | 2,000 lbf (8,896 N) |
| Max Thrust Y | 2,000 lbf (8,896 N) |
| Max Thrust Z | 2,000 lbf (8,896 N) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Single Phase | 220 VAC 1-phase, 40 A |
| Electrical Low | 220 VAC 3-phase, 25 A |
| Electrical High | 440 VAC 3-phase, 13 A |
| Shipping Domestic Pallet | 99.5 × 78 × 100 in (253 × 198 × 254 cm) |
| Shipping Export Pallet | 99.5 × 78 × 100 in (253 × 198 × 254 cm) |
| Machine Weight | 3,660 lb (1,660 kg) |
Haas Automation publishes a list price of US$39,995 for the Haas TM-0 (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-tm-0#price; the request is passed to Haas Automation or an authorised dealer.
Yes. Haas lists 220 VAC single-phase at 40 A as one of three supply choices. The other two are 220 VAC three-phase at 25 A and 440 VAC three-phase at 13 A. The single-phase option draws more current than either three-phase one, so size the breaker and wiring for 40 A.
The TM-0P adds a tool changer holding 10 tools, raises spindle speed from 4,000 rpm to 6,000 rpm and doubles feed and rapid from 200 ipm (5.1 m/min) to 400 ipm (10.2 m/min). Travels of 20 × 12 × 16 in (508 × 305 × 406 mm), the 7.5 hp (5.6 kW) spindle rating, the 350 lb (159 kg) table load and the 3,660 lb (1,660 kg) weight are the same on the TM-0 and the TM-0P.
The cutting envelope is 20 in (508 mm) in X, 12 in (305 mm) in Y and 16 in (406 mm) in Z. The spindle nose sits between 4 in (102 mm) and 20 in (508 mm) above the table, so the part, its workholding and the tool must stack up inside 20 in. Part plus workholding may weigh up to 350 lb (159 kg).
The TM-1 has 30 in (762 mm) of X and 16 in (406 mm) of Y, against 20 in (508 mm) and 12 in (305 mm) on the TM-0. Z travel is 16 in (406 mm) on both the TM-0 and the TM-1, and so are the 4,000 rpm spindle, the 200 ipm (5.1 m/min) feedrate and the 350 lb (159 kg) table load. The TM-1 ships at 4,440 lb (2,014 kg), the TM-0 at 3,660 lb (1,660 kg).
4 scfm at 100 psi (113 L/min at 6.9 bar), with a minimum supply pressure of 80 psi (5.5 bar). The inline air hose and the coupler are both 3/8 in. That is a modest demand, within reach of a small shop compressor that can hold pressure above the minimum.
