The Haas Automation TM-0P is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas TM-0P: 20 x 12 x 16 in (508 x 305 x 406 mm) toolroom mill with a 10-pocket tool changer, 6,000 rpm 40-taper spindle and 400 ipm rapids.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 7.5 kW |
| Spindle Taper Interface | CT or BT 40 |
| Table / Platter / Chuck Size | 38.4 × 10.5 in (975 × 267 mm) |
| Max Table Load Capacity | 350 kg |
| Automatic Tool Changer (ATC) | 10 Tool Stations |
| Approx. Machine Weight | 3,660 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 20 in (508 mm) |
| Y-Axis Travel | 12 in (305 mm) |
| Z-Axis Travel | 16 in (406 mm) |
| Spindle Nose To Table Max | 20 in (508 mm) |
| Spindle Nose To Table Min | 4 in (102 mm) |
| Spindle Motor Power | 7.5 hp (5.6 kW) |
| Max Spindle Speed | 6,000 rpm |
| Spindle Torque | 33 ft-lbf @ 1,200 rpm (45 N·m @ 1,200 rpm) |
| Spindle Drive | Direct Speed, Belt Drive |
| Spindle Taper | CT or BT 40 |
| Spindle Bearing Lubrication | Grease Packed |
| Spindle Cooling | Air Cooled |
| Table Size | 38.4 × 10.5 in (975 × 267 mm) |
| Table Work Area Length | 30.5 in (775 mm) |
| T Slot Width | 0.626 in to 0.63 in (15.9 mm to 16 mm) |
| T Slot Center Distance | 4 in (102 mm) |
| T Slots | 3 |
| Max Table Load | 350 lb (159 kg) |
| Max Cutting Feedrate | 400 ipm (10.2 m/min) |
| Rapid Traverse | 400 ipm (10.2 m/min) |
| Max Thrust X | 2,000 lbf (8,896 N) |
| Max Thrust Y | 2,000 lbf (8,896 N) |
| Max Thrust Z | 2,000 lbf (8,896 N) |
| Tool Changer Type | Carousel |
| Tool Capacity | 10 |
| Max Tool Diameter | 3.5 in (89 mm) |
| Max Tool Weight | 12 lb (5.4 kg) |
| Tool To Tool | 5.7 s |
| Chip To Chip | 6.5 s |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Single Phase | 220 VAC 1-phase, 40 A |
| Electrical Low | 220 VAC 3-phase, 25 A |
| Electrical High | 440 VAC 3-phase, 13 A |
| Shipping Domestic Pallet | 100 × 78 × 99.5 in (254 × 198 × 253 cm) |
| Shipping Export Pallet | 100 × 78 × 99.5 in (254 × 198 × 253 cm) |
| Machine Weight | 3,660 lb (1,660 kg) |
Haas Automation publishes a list price of US$44,995 for the Haas TM-0P (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-tm-0p#price; the request is passed to Haas Automation or an authorised dealer.
A carousel tool changer with 10 tools, a faster spindle and faster axes. The TM-0 tops out at 4,000 rpm and 200 ipm (5.1 m/min); the TM-0P reaches 6,000 rpm and 400 ipm (10.2 m/min). Travels, the 7.5 hp (5.6 kW) rating, the 350 lb (159 kg) table load and the 3,660 lb (1,660 kg) weight match the TM-0.
Haas lists 5.7 s tool-to-tool and 6.5 s chip-to-chip for the 10-pocket carousel. Those times suit toolroom and short-run work. On a part with many short operations the changes add up, so group operations by tool where the program allows.
Up to 3.5 in (89 mm) in diameter and 12 lb (5.4 kg) per tool, in CT or BT 40. No maximum tool length is given in the table. The distance from spindle nose to table ranges from 4 in (102 mm) to 20 in (508 mm), which is the figure to check long tools against.
Yes. The supply choices are 220 VAC single-phase at 40 A, 220 VAC three-phase at 25 A and 440 VAC three-phase at 13 A. Air is also required: 4 scfm at 100 psi (113 L/min at 6.9 bar), minimum 80 psi (5.5 bar), through a 3/8 in hose and coupler.
When the part or fixture needs more than 12 in (305 mm) of Y or 20 in (508 mm) of X. The TM-1P has 30 in (762 mm) of X and 16 in (406 mm) of Y with the same 6,000 rpm spindle, 10 tools and 400 ipm (10.2 m/min) rapids. It is heavier, 4,440 lb (2,014 kg) for the TM-1P against 3,660 lb (1,660 kg) here.
