The Haas Automation TM-1 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas TM-1 toolroom mill: 30 x 16 x 16 in (762 x 406 x 406 mm) travels, 47.8 x 10.5 in table, 4,000 rpm 40-taper spindle, single- or three-phase.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 7.5 kW |
| Spindle Taper Interface | CT or BT 40 |
| Table / Platter / Chuck Size | 47.8 × 10.5 in (1,213 × 267 mm) |
| Max Table Load Capacity | 350 kg |
| Approx. Machine Weight | 4,440 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 30 in (762 mm) |
| Y-Axis Travel | 16 in (406 mm) |
| Z-Axis Travel | 16 in (406 mm) |
| Spindle Nose To Table Max | 20 in (508 mm) |
| Spindle Nose To Table Min | 4 in (102 mm) |
| Spindle Motor Power | 7.5 hp (5.6 kW) |
| Max Spindle Speed | 4,000 rpm |
| Spindle Torque | 33 ft-lbf @ 1,200 rpm (45 N·m @ 1,200 rpm) |
| Spindle Drive | Direct Speed, Belt Drive |
| Spindle Taper | CT or BT 40 |
| Spindle Bearing Lubrication | Grease Packed |
| Spindle Cooling | Air Cooled |
| Table Size | 47.8 × 10.5 in (1,213 × 267 mm) |
| T Slot Width | 0.626 in to 0.63 in (15.9 mm to 16 mm) |
| T Slot Center Distance | 4 in (102 mm) |
| T Slots | 3 |
| Max Table Load | 350 lb (159 kg) |
| Max Cutting Feedrate | 200 ipm (5.1 m/min) |
| Rapid Traverse | 200 ipm (5.1 m/min) |
| Max Thrust X | 2,000 lbf (8,896 N) |
| Max Thrust Y | 2,000 lbf (8,896 N) |
| Max Thrust Z | 2,000 lbf (8,896 N) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Single Phase | 220 VAC 1-phase, 40 A |
| Electrical Low | 220 VAC 3-phase, 25 A |
| Electrical High | 440 VAC 3-phase, 13 A |
| Shipping Domestic Pallet | 112 × 80 × 100 in (284 × 203 × 254 cm) |
| Shipping Export Pallet | 112 × 80 × 100 in (284 × 203 × 254 cm) |
| Machine Weight | 4,440 lb (2,014 kg) |
Haas Automation publishes a list price of US$46,995 for the Haas TM-1 (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-tm-1#price; the request is passed to Haas Automation or an authorised dealer.
Haas's specification table for the TM-1 lists no tool changer, tool capacity or tool-change time. The TM-1P is the variant that has one: it carries 10 tools, with the same 30 × 16 × 16 in (762 × 406 × 406 mm) travels and the same 47.8 × 10.5 in (1,213 × 267 mm) table.
The table measures 47.8 in (1,213 mm) and X travel is 30 in (762 mm). The spindle covers the middle of the table only. The remaining length supports long workpieces and gives space to leave a vise, stop or fixture mounted outside the cutting area while another job runs.
350 lb (159 kg). That figure includes vises, fixture plates and any rotary device as well as the workpiece, so add them up before committing a heavy steel part. The table has 3 T-slots, 0.626 in to 0.63 in (15.9 mm to 16 mm) wide, on 4 in (102 mm) centres.
X travel and table length. The TM-2 has 40 in (1,016 mm) of X and a 57.8 × 10.5 in (1,467 × 267 mm) table; the TM-1 has 30 in (762 mm) and 47.8 × 10.5 in (1,213 × 267 mm). Y and Z are 16 in (406 mm) on both the TM-1 and the TM-2, the spindle is the same 4,000 rpm unit, and the TM-2 weighs 5,060 lb (2,295 kg) against 4,440 lb (2,014 kg).
One of three: 220 VAC single-phase at 40 A, 220 VAC three-phase at 25 A, or 440 VAC three-phase at 13 A. It also needs compressed air, 4 scfm at 100 psi (113 L/min at 6.9 bar), with supply pressure never below 80 psi (5.5 bar).
