The Haas Automation TM-2P is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas TM-2P: 40 x 16 x 16 in (1,016 x 406 x 406 mm) toolroom mill with 10-tool carousel, 6,000 rpm spindle, 400 ipm rapids, 57.8 x 10.5 in table.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 7.5 kW |
| Spindle Taper Interface | CT or BT 40 |
| Table / Platter / Chuck Size | 57.8 × 10.5 in (1,466 × 267 mm) |
| Max Table Load Capacity | 350 kg |
| Automatic Tool Changer (ATC) | 10 Tool Stations |
| Approx. Machine Weight | 5,060 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 40 in (1,016 mm) |
| Y-Axis Travel | 16 in (406 mm) |
| Z-Axis Travel | 16 in (406 mm) |
| Spindle Nose To Table Max | 20 in (508 mm) |
| Spindle Nose To Table Min | 4 in (102 mm) |
| Spindle Motor Power | 7.5 hp (5.6 kW) |
| Max Spindle Speed | 6,000 rpm |
| Spindle Torque | 33 ft-lbf @ 1,200 rpm (45 N·m @ 1,200 rpm) |
| Spindle Drive | Direct Speed, Belt Drive |
| Spindle Taper | CT or BT 40 |
| Spindle Bearing Lubrication | Grease Packed |
| Spindle Cooling | Air Cooled |
| Table Size | 57.8 × 10.5 in (1,466 × 267 mm) |
| T Slot Width | 0.626 in to 0.63 in (15.9 mm to 16 mm) |
| T Slot Center Distance | 4 in (102 mm) |
| T Slots | 3 |
| Max Table Load | 350 lb (159 kg) |
| Max Cutting Feedrate | 400 ipm (10.2 m/min) |
| Rapid Traverse | 400 ipm (10.2 m/min) |
| Max Thrust X | 2,000 lbf (8,896 N) |
| Max Thrust Y | 2,000 lbf (8,896 N) |
| Max Thrust Z | 2,000 lbf (8,896 N) |
| Tool Changer Type | Carousel |
| Tool Capacity | 10 |
| Max Tool Diameter | 3.5 in (89 mm) |
| Max Tool Weight | 12 lb (5.4 kg) |
| Tool To Tool | 5.7 s |
| Chip To Chip | 6.5 s |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Single Phase | 220 VAC 1-phase, 40 A |
| Electrical Low | 220 VAC 3-phase, 25 A |
| Electrical High | 440 VAC 3-phase, 13 A |
| Shipping Domestic Pallet | 127 × 78 × 100 in (323 × 198 × 254 cm) |
| Shipping Export Pallet | 127 × 78 × 100 in (323 × 198 × 254 cm) |
| Machine Weight | 5,060 lb (2,295 kg) |
Haas Automation publishes a list price of US$56,995 for the Haas TM-2P (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-tm-2p#price; the request is passed to Haas Automation or an authorised dealer.
In X travel and table length. The TM-1P has 30 in (762 mm) of X and a 47.8 × 10.5 in (1,213 × 267 mm) table; the TM-2P has 40 in (1,016 mm) and 57.8 × 10.5 in (1,466 × 267 mm). Spindle speed of 6,000 rpm, the 10 tools, the 400 ipm (10.2 m/min) rapids and the 350 lb (159 kg) table load are common to the TM-1P and the TM-2P. Shipping weight is 5,060 lb (2,295 kg) here and 4,440 lb (2,014 kg) for the TM-1P.
The table is 57.8 in (1,466 mm) long and X travel is 40 in (1,016 mm), so whatever is mounted has to fall inside the 40 in the spindle can reach. The count depends on vise width. The firmer limit is weight: all workholding and parts together must stay within 350 lb (159 kg).
For families of similar parts, usually yes, since one set of drills, taps and end mills serves each station. Different parts on the same table compete for the 10 pockets. Each pocket holds a tool up to 3.5 in (89 mm) in diameter and 12 lb (5.4 kg), and a change takes 6.5 s chip-to-chip.
Z travel is 16 in (406 mm). The spindle nose is 4 in (102 mm) above the table at the bottom of travel and 20 in (508 mm) at the top. Workholding height, part height and tool length all come out of that 20 in, and the table lists no separate maximum tool length.
Any one of 220 VAC single-phase at 40 A, 220 VAC three-phase at 25 A or 440 VAC three-phase at 13 A. Air consumption is 4 scfm at 100 psi (113 L/min at 6.9 bar), the minimum supply pressure is 80 psi (5.5 bar), and the hose and coupler are 3/8 in.
