The Hwacheon D2-5AX is an industrial-grade 5-Axis Machining Centers powered by the Fanuc 0i-MF Plus (optional Fanuc 31i-B5 Plus; HARMONY on either). It offers working travels of 650 x 500 x 500 mm, a top spindle speed of 12,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon D2-5AX 5-axis machining centre: 650/500/500 mm travels, Ø600 mm table, 12,000-24,000 rpm 37 kW spindles, up to 120 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Fanuc 0i-MF Plus (optional Fanuc 31i-B5 Plus; HARMONY on either) |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 650 mm |
| Y-Axis Travel | 500 mm |
| Z-Axis Travel | 500 mm |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 37.0 kW |
| Spindle Taper Interface | ISO #40, 7/24 taper (BBT-40); options CAT-40, HSK- |
| Table / Platter / Chuck Size | Ø600 mm (23.6 in) (optional Ø400 / Ø500) |
| Max Table Load Capacity | 500 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 11,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 650 mm (25.6 in) |
| Y Axis Travel | 500 mm (19.7 in) |
| Z Axis Travel | 500 mm (19.7 in) |
| B Axis Range | -30 to +110 deg |
| C Axis Range | 360 deg |
| Distance Spindle Nose To Table | 175-675 mm (6.9-26.6 in) |
| Z Guide To Spindle Center | 192 mm (7.6 in) |
| Table Size | Ø600 mm (23.6 in) (optional Ø400 / Ø500) |
| Max Table Load | 500 kgf (1,102 lb) |
| T Slots | 14 x 80 mm x 5 (width x pitch x number) |
| Rotary Table Resolution | 0.0001 deg |
| Max Spindle Speed | 12,000 rpm standard (14,000 / 20,000 / 24,000 rpm optional) |
| Spindle Motor Power | 37 / 18.5 kW (49.6 / 24.8 hp) for 12,000, 20,000 and 24,000 rpm; 37 / 22 kW (49.6 / 29.5 hp) for 14,000 rpm |
| Spindle Torque | 250 Nm (184.4 lb-ft) at 12,000 rpm; 303 Nm (223.5 lb-ft) at 14,000 rpm; 221 Nm (163.0 lb-ft) at 20,000 / 24,000 rpm |
| Spindle Taper | ISO #40, 7/24 taper (BBT-40); options CAT-40, HSK-A63, SK-40; HSK-A63 on 24,000 rpm |
| Spindle Bearing Bore | Ø70 mm (2.8 in) |
| Spindle Cooling | Oil cooler |
| Rapid Traverse Xyz | 36 / 30 / 30 m/min (1,417 / 1,181 / 1,181 ipm) |
| Axis Motors | X / Y / Z / B / C 7 / 4 / 4 / 5.5 / 2.7 kW |
| Tool Capacity | 30 (optional 40, 60, 120) |
| Max Tool Diameter | Ø80 / Ø130 mm (3.1 / 5.1 in) with / without adjacent tools |
| Max Tool Length | 300 mm (11.8 in) |
| Max Tool Weight | 8 kgf (18 lb) |
| Tool Selection | Memory random |
| Pull Stud | MAS P40T-1 (45 deg) |
| Power Requirement | 70 kVA; air 0.5-0.7 MPa |
| Machine Height | 3,610 mm (142.1 in) |
| Floor Space | 3,970 x 3,523 mm (156.3 x 138.7 in) L x W (mesh-drum chip type 4,360 x 3,523 mm; rear discharge 3,450 x 4,370 mm) |
| Machine Weight | 11,500 kgf (25,353 lb) (mesh-drum type 11,800 kgf; rear discharge 11,600 kgf) |
| CNC Control | Fanuc 0i-MF Plus (optional Fanuc 31i-B5 Plus; HARMONY on either) |
| Automation | AWC (20 pallets) or HMP-100 multi-pallet system on the right side; robot loading from front or right |
The price estimate for the Hwacheon D2-5AX is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hwacheon-d2-5ax#price; the request is passed to Hwacheon or an authorised dealer.
X, Y and Z travels are 650, 500 and 500 mm. The B axis tilts from -30 to +110 degrees and the C axis rotates 360 degrees; the distance from spindle nose to table is 175-675 mm.
A 12,000 rpm spindle (37/18.5 kW, 250 Nm) is standard. Options are 14,000 rpm (37/22 kW, 303 Nm), 20,000 rpm and 24,000 rpm (both 37/18.5 kW, 221 Nm). The 24,000 rpm spindle uses HSK-A63; the others take BBT-40, CAT-40, HSK-A63 or SK-40.
30 tools as standard, with 40, 60 and 120 tool magazines available. Maximum tool diameter is 80 mm with adjacent tools (130 mm without), length 300 mm and weight 8 kgf.
Yes. Hwacheon designed it for automation: robots can load from the front or right side, and a 20-pallet AWC or the HMP-100 multi-pallet system can be fitted on the right side.
Fanuc 0i-MF Plus as standard, with Fanuc 31i-B5 Plus as an option. Hwacheon's HARMONY interface is available on both.
