The Hwacheon Hi-M1300 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the SIEMENS-828D (FANUC 0i-MF opt.). It offers working travels of 1300 x 800 x 400 mm, a top spindle speed of 24,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon Hi-M1300 VMC: 24,000 or 30,000 rpm BT-30 spindle, 1,300 x 800 x 400 mm travels, 1,300 x 800 mm table, 300 kg load, SIEMENS-828D.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | SIEMENS-828D (FANUC 0i-MF opt.) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 1,300 mm |
| Y-Axis Travel | 800 mm |
| Z-Axis Travel | 400 mm |
| Maximum Spindle Speed | 24,000 RPM |
| Spindle Motor Rating | 6.0 kW |
| Spindle Taper Interface | BT-30 |
| Table / Platter / Chuck Size | 1,300 x 800 mm (51.2 x 31.5 in) |
| Max Table Load Capacity | 300 kg |
| Automatic Tool Changer (ATC) | 16 Tool Stations |
| Approx. Machine Weight | 5,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 1,300 mm (51.2 in) |
| Y Axis Travel | 800 mm (31.5 in) |
| Z Axis Travel | 400 mm (15.7 in) |
| Distance Spindle Nose To Table | 50 ~ 450 mm (2.0 ~ 17.7 in) |
| Table Size | 1,300 x 800 mm (51.2 x 31.5 in) |
| Max Table Load | 300 kg (661 lb) |
| T Slots | 16 x 125 mm, 5 slots (width x pitch: 0.63 x 4.9 in) |
| Max Spindle Speed | 24,000 rpm / 30,000 rpm (two spindle versions) |
| Spindle Motor Power | 6 kW (8.0 hp) (12.5 kW (16.8 hp) opt.) |
| Spindle Taper | BT-30 |
| Spindle Cooling | Coolant cooling (water chiller) |
| Rapid Traverse Xyz | 25 / 25 / 20 m/min (984 / 984 / 787 ipm) |
| Spindle Drive | Built-in |
| Spindle Lubrication | Grease |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (up to 394 ipm) |
| Tool Capacity | 16 |
| Max Tool Diameter | Ø16 mm (Ø0.6 in) |
| Max Tool Length | 200 mm (7.9 in) |
| Max Tool Weight | 3 kg (6.6 lb) |
| Tool Selection | Fixed Address |
| CNC Control | SIEMENS-828D (FANUC 0i-MF opt.) |
| Power Requirement | 25 kVA |
| Power Supply | 380V, 60Hz (FANUC: 220V, 60Hz) |
| Air Supply | 0.5~0.7MPa x 690Nℓ/min |
| Machine Height | 2,360 ~ 2,760 mm (92.9 ~ 108.7 in) |
| Machine Dimensions | 2,462 x 2,755 mm (96.9 x 108.5 in); full cover 2,690 x 2,670 mm (105.9 x 105.1 in) (length x width) |
| Machine Weight | 5,000 kg (11,023 lb) |
The price estimate for the Hwacheon Hi-M1300 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hwacheon-hi-m1300#price; the request is passed to Hwacheon or an authorised dealer.
Two: 24,000 rpm and 30,000 rpm, both on a BT-30 taper with a built-in drive, grease lubrication and water-chiller cooling. Power is 6 kW (8.0 hp) as standard, with 12.5 kW (16.8 hp) as an option. Choose the faster spindle when very small end mills decide the cycle time.
Both have a 1,300 x 800 mm (51.2 x 31.5 in) table. The Hwacheon Hi-M G2+ has a 20 kW (26.8 hp) BT 40 spindle at 20,000 rpm, an 800 kg (1,764 lb) table load and weighs 9,500 kg (20,944 lb). The Hi-M1300 runs BT-30 at 24,000 rpm or 30,000 rpm, takes 300 kg (661 lb) and weighs 5,000 kg (11,023 lb).
25 kVA, on 380V, 60Hz with the SIEMENS-828D control or 220V, 60Hz with FANUC 0i-MF. Air supply is 0.5~0.7MPa x 690Nℓ/min. Allow 2,462 x 2,755 mm (96.9 x 108.5 in) of floor, or 2,690 x 2,670 mm (105.9 x 105.1 in) with the full cover.
300 kg (661 lb), spread over a 1,300 x 800 mm (51.2 x 31.5 in) table with five 16 mm T-slots at 125 mm pitch. That suits plates and light fixtures; for heavier work on the same table size, the 800 kg (1,764 lb) rating of the Hwacheon Hi-M G2+ is the alternative.
