The Hwacheon L2 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the FANUC 0i-MF Plus. It offers working travels of 2 x 1100 x 500 mm, a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon L2: 1,100 mm wide table, 2,500 or 3,000 mm X travel, 1,100 mm Y, 2,000 kg load, BT-40 spindle to 20,000 rpm, 30 tools (40 opt.).
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | FANUC 0i-MF Plus |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 2 mm |
| Y-Axis Travel | 1,100 mm |
| Z-Axis Travel | 500 mm |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 12.0 kW |
| Spindle Taper Interface | ISO#40, 7/24 Taper (BT-40) |
| Table / Platter / Chuck Size | L2 2500: 2,500 x 1,100 mm (98.4 x 43.3 in); L2 3000: 3,000 x 1,100 mm (118.1 x 43.3 in) |
| Max Table Load Capacity | 2,000 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 2 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | L2 2500: 2,500 mm (98.4 in); L2 3000: 3,000 mm (118.1 in) |
| Y Axis Travel | 1,100 mm (43.3 in) |
| Z Axis Travel | 500 mm (19.7 in) |
| Width Between Columns | 1,350 mm (53.1 in) |
| Distance Spindle Nose To Table | 100 ~ 600 mm (3.9 ~ 23.6 in) |
| Table Size | L2 2500: 2,500 x 1,100 mm (98.4 x 43.3 in); L2 3000: 3,000 x 1,100 mm (118.1 x 43.3 in) |
| Max Table Load | 2,000 kg (4,409 lb) |
| T Slots | 18 x 110 mm, 9 slots (width x pitch: 0.71 x 4.3 in) |
| Max Spindle Speed | 12,000 rpm (12K) / 20,000 rpm (20K) |
| Spindle Motor Power | 12K: 18.5 / 11 kW (24.8 / 14.8 hp); 20K: 37 / 18.5 kW (49.6 / 24.8 hp) |
| Spindle Taper | ISO#40, 7/24 Taper (BT-40) |
| Spindle Bearing Bore | Ø70 mm (Ø2.8 in) |
| Cutting Feed Rate | 1 ~ 20,000 mm/min (up to 787 ipm) |
| Tool Shank | MAS-403 BT-40 |
| Pull Stud | MAS-P40T-1 (45°) |
| Tool Capacity | 30 (40 opt.) |
| Max Tool Diameter | Ø75 / Ø150 mm (Ø3.0 / Ø5.9 in), with / without adjacent tools |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 8 kg (17.6 lb) |
| Tool Selection | Memory random (fixed address opt.) |
| Atc Drive | Servo motor (magazine / swing arm) |
| Axis Motors Xyz | 6 / 4 / 4 kW (8.0 / 5.4 / 5.4 hp) |
| Coolant Pump Motor | 1.1 kW (1.5 hp) |
| Power Requirement | 45 kVA |
| Power Supply | 220V, 60Hz |
| Air Supply | 0.5 ~ 0.7 MPa x 690 Nℓ/min |
| Rapid Traverse Xyz | 24 / 36 / 36 m/min (945 / 1,417 / 1,417 ipm) |
| Machine Height | 3,060 mm (120.5 in) |
| Machine Dimensions | L2 2500: 8,540 x 3,785 mm (336.2 x 149.0 in); L2 3000: 9,780 x 3,785 mm (385.0 x 149.0 in) (length x width) |
| Machine Weight | L2 2500: 17,000 kg (37,478 lb); L2 3000: 19,000 kg (41,887 lb) |
| CNC Control | FANUC 0i-MF Plus |
The price estimate for the Hwacheon L2 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hwacheon-l2#price; the request is passed to Hwacheon or an authorised dealer.
Two. The L2 2500 has 2,500 mm (98.4 in) of X travel and a 2,500 x 1,100 mm (98.4 x 43.3 in) table and weighs 17,000 kg (37,478 lb). The L2 3000 has 3,000 mm (118.1 in) of X travel and a 3,000 x 1,100 mm (118.1 x 43.3 in) table and weighs 19,000 kg (41,887 lb).
The Hwacheon L1 has 900 mm (35.4 in) wide tables in 1,500 and 2,500 mm lengths. The L2 widens the table to 1,100 mm (43.3 in) and adds a 3,000 mm (118.1 in) length. Both are rated 2,000 kg (4,409 lb) and use the same 12K and 20K BT-40 spindle options.
The table is rated 2,000 kg (4,409 lb) on both lengths. Where a part or fixture is heavier, the Hwacheon L3 is rated 3,000 kg (6,614 lb) on its 3,000 x 1,800 mm (118.1 x 70.9 in) table.
A 12K spindle at 12,000 rpm rated 18.5 / 11 kW (24.8 / 14.8 hp) and a 20K spindle at 20,000 rpm rated 37 / 18.5 kW (49.6 / 24.8 hp). Both use ISO#40 7/24 BT-40 tooling with a Ø70 mm (Ø2.8 in) bearing bore.
45 kVA at 220V, 60Hz, and air at 0.5 to 0.7 MPa with a flow of 690 Nℓ/min. The coolant pump motor is rated 1.1 kW (1.5 hp). Check the 3,060 mm (120.5 in) machine height against the building as well.
