The Hwacheon MEGAII-100 is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 0i-TF Plus. It offers working travels of 400 x x 3000 mm, a top spindle speed of 5 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon MEGAII-100 heavy lathe: Ø1,000 mm swing, 3,000-10,000 mm centres, 8 t workpieces, 24 in chuck, 45 kW, up to 17,220 Nm, hydraulic tool post.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 0i-TF Plus |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 400 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 3,000 mm |
| Maximum Spindle Speed | 5 RPM |
| Spindle Motor Rating | 45.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Swing Over Bed | Ø1,000 mm (Ø39.37 in) |
| Swing Over Cross Slide | Ø200 ~ Ø700 mm (Ø7.87 ~ Ø27.56 in) |
| Max Turning Diameter | Ø1,000 mm (Ø39.37 in) over bed |
| Distance Between Centers | 3,000 / 4,000 / 5,000 / 6,000 / 7,000 / 8,000 / 10,000 mm (118.11 / 157.48 / 196.85 / 236.22 / 275.59 / 314.96 / 393.7 in) |
| Max Workpiece Weight | 8 t (17,637 lb) |
| X Axis Travel | 400 mm (15.75 in) |
| Z Axis Travel | 3,000 / 4,000 / 5,000 / 6,000 / 7,000 / 8,000 / 10,000 mm (118.11 / 157.48 / 196.85 / 236.22 / 275.59 / 314.96 / 393.7 in) |
| Chuck Size | 24 in |
| Spindle Nose | A2-15 (Ø155, Ø255 bore) / A2-20 (Ø320 bore) |
| Spindle Bore | Ø155 / Ø255 / Ø320 mm (Ø6.1 / Ø10.0 / Ø12.6 in) |
| Spindle Torque | 941 kgf·m (Ø155 bore) / 1,168 kgf·m (Ø255) / 1,756 kgf·m (Ø320) (9,228 / 11,454 / 17,220 Nm) |
| Spindle Speed Ranges | Auto 3-steps |
| Max Spindle Speed | 5 ~ 750 rpm (Ø155 bore) / 5 ~ 650 rpm (Ø255) / 5 ~ 400 rpm (Ø320) |
| Spindle Motor Power | 45 / 37 kW (60.3 / 49.6 hp) |
| Rapid Traverse X | 6 m/min (236.22 ipm) |
| Rapid Traverse Z | 6 m/min (236.22 ipm) on the 3000-5000 beds; 5 m/min (196.85 ipm) on the 6000-10000 beds |
| Tool Post | Hydraulic 4-way (square) tool post, □200 mm |
| Turret Stations | 4 tools |
| Tool Shank Size | □40 mm |
| Tailstock | Built-in type |
| Tailstock Quill Diameter | Ø200 mm (Ø7.87 in); Ø250 mm (Ø9.84 in) on the 10000 bed |
| Tailstock Center | MT No.6 |
| Tailstock Quill Travel | 260 mm (10.24 in) |
| Bed Width | 1,000 mm (39.37 in) |
| Bed Length | 5,492 to 12,492 mm (216.22 to 491.81 in) depending on centre distance |
| Bed Type | 3-Way (1-Bed) |
| Cross Slide | Short Carriage / Square |
| Coolant Tank | 220 to 570 L (58 to 151 gal) depending on bed length |
| Power Requirement | 76 kVA on 3000-5000 beds; 84 kVA on 6000; 90 kVA on 7000-10000; 220 V, 60 Hz |
| Machine Dimensions | 7,992 to 14,992 x 3,400 x 2,310 mm (314.65 to 590.24 x 133.86 x 90.94 in) (L x W x H) |
| CNC Control | FANUC 0i-TF Plus |
The price estimate for the Hwacheon MEGAII-100 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hwacheon-megaii-100#price; the request is passed to Hwacheon or an authorised dealer.
Swing and X travel. The MEGAII-100 swings Ø1,000 mm (Ø39.37 in) with 400 mm (15.75 in) of X. The MEGAII-120 swings Ø1,200 mm with 500 mm of X, and the MEGAII-140 Ø1,400 mm with 600 mm of X. Spindle, chuck, tool post, bed and tailstock are the same on all three.
A 24 in chuck instead of 18 in, 45 / 37 kW (60.3 / 49.6 hp) instead of 22 / 18.5 kW (29.5 / 24.8 hp) with FANUC on the MEGA+100, and a hydraulic □200 mm tool post for □40 mm shanks. It also carries a stated workpiece rating of 8 t (17,637 lb).
A 4-way square tool post of □200 mm that indexes hydraulically, holding four □40 mm shank tools. Four positions cover a roughing, finishing, grooving and threading set on a shaft, but a part needing more tools needs a manual change.
Three bores. Ø155 mm (Ø6.1 in): A2-15, 750 rpm, 941 kgf·m (9,228 Nm). Ø255 mm (Ø10.0 in): A2-15, 650 rpm, 1,168 kgf·m (11,454 Nm). Ø320 mm (Ø12.6 in): A2-20, 400 rpm, 1,756 kgf·m (17,220 Nm). All use a three-step automatic gearbox and 45 / 37 kW (60.3 / 49.6 hp).
