The Hwacheon VT-1350 MC is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 0i-TF Plus. It offers working travels of -400 x x 1000 mm, a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon VT-1350 MC vertical turning centre: Ø1,650 mm turning, 45/37 kW 23,460 Nm table, 26/22 kW BT-50 milling ram, C axis.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 0i-TF Plus |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | -400 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 1,000 mm |
| Spindle Motor Rating | 45.0 kW |
| Spindle Taper Interface | 7/24 taper BT-50 |
| Table / Platter / Chuck Size | Ø1,350 mm (Ø53.15 in) |
| Max Table Load Capacity | 8,000 kg |
| Automatic Tool Changer (ATC) | 16 Tool Stations |
| Approx. Machine Weight | 30,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Swing | Ø1,750 mm (Ø68.90 in) |
| Max Turning Diameter | Ø1,650 mm (Ø64.96 in) |
| Max Turning Height | 1,300 mm (51.18 in) |
| Max Workpiece Height | 1,300 mm (51.18 in) |
| X Axis Travel | -400 to +1,100 mm (-15.75 to +43.31 in) (ram left/right) |
| Z Axis Travel | 1,000 mm (39.37 in) (ram up/down) |
| W Axis Travel | 800 mm (31.50 in) (cross rail up/down) |
| Table Size | Ø1,350 mm (Ø53.15 in) |
| Table Speed Max | 350 rpm (2-speed: low 1-89 rpm, high 90-350 rpm) |
| Spindle Motor Power | 45 / 37 kW (60 / 50 hp) table motor (30 min / cont.) |
| Spindle Torque | 23,460 Nm (17,304 lb-ft) table |
| Max Table Load | 8,000 kgf (17,637 lbf) |
| C Axis Min Increment | 0.001 deg |
| C Axis Speed Max | 3 rpm |
| Milling Spindle Power | 26 / 22 kW (35 / 29.5 hp) (30 min / cont.) |
| Milling Spindle Torque | 386 / 326 Nm (284.7 / 240.5 lb-ft) |
| Milling Spindle Speed Max | 3,000 rpm |
| Ram Size | □250 mm (□9.84 in) |
| Spindle Taper | 7/24 taper BT-50 |
| Rapid Traverse Xyz | X / Z / W 12 / 12 / 5 m/min (472 / 472 / 197 ipm) |
| Cutting Feed Rate | X / Z 1-2,000 mm/min (0.03-78.74 ipm); C 0-900 deg/min |
| Tool Capacity | 16 (optional 24 drum type or 34 chain type, each including 1 dummy cover) |
| Turning Tool Size | □40 mm (mm type) / □1.5 in (inch type) |
| Max Tool Diameter | Ø150 / Ø350 mm (Ø5.90 / Ø13.78 in) with / without adjacent tools |
| Max Tool Length | 550 mm (21.65 in) |
| Max Tool Weight | 120 kgf (265 lbf) |
| Feed Motors | X / Z / W 5.5 / 5.5 / 5.5 kW (7.5 / 7.5 / 7.5 hp) |
| Power Requirement | 110 kVA, 380 V, 60 Hz |
| Machine Dimensions | 8,090 x 5,125 mm (318.50 x 201.77 in) L x W, height 5,815 mm (228.94 in) |
| Machine Weight | 30,000 kgf (66,139 lbf) |
| CNC Control | FANUC 0i-TF Plus |
| Guideways | Box way (X, Z, W axes), cross-rail moving type |
The price estimate for the Hwacheon VT-1350 MC is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hwacheon-vt-1350-mc#price; the request is passed to Hwacheon or an authorised dealer.
Both share the same swing, table and axes. The MC version adds a C axis (0.001 degree minimum increment, 3 rpm maximum) and a driven milling spindle in the ram rated at 26/22 kW, 386/326 Nm and 3,000 rpm, so milling, drilling and tapping can be done in the same setup.
Maximum swing is 1,750 mm, maximum turning diameter 1,650 mm and maximum turning height 1,300 mm. The 1,350 mm table carries up to 8,000 kgf.
The table motor is rated 45 kW for 30 minutes and 37 kW continuous, with a two-speed gearbox (1-89 rpm and 90-350 rpm) and a maximum torque of 23,460 Nm.
16 tools as standard in a drum magazine, with 24-tool drum and 34-tool chain magazines available as options. Tools can be up to 550 mm long and 120 kgf.
The specification table lists a FANUC 0i-TF Plus control, supported by Hwacheon's own turning software such as the HLVC chatter control and L-CAL cutting-condition calculator.
