The Hyundai-WIA Hyundai WIA E160C is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA E160C CNC lathe: 8 in chuck, 4,000 rpm, 64.4 / 126 N·m spindle torque, 10-station turret, 280 mm turning diameter and length.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 10 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 280 mm (11 in) |
| Max Spindle Speed | 4,000 rpm |
| Spindle Motor Power | 11 / 7.5 kW (14.8 / 10.1 hp) |
| Turret Stations | 10 |
| Spindle Drive | Belt |
| Chuck Size | 8 in (203 mm) |
| Max Turning Length | 280 mm (11 in) |
| X-Axis Travel | 165 mm (6.5 in) |
| Z-Axis Travel | 330 mm (13 in) |
| Rapid Traverse | X/Z: 30 / 30 m/min (1,181 / 1,181 ipm) |
| Spindle Torque | 64.4 / 126 N·m (47.5 / 92.9 ft-lbf) |
| Tool Capacity | 10 tools |
Our best estimate for the Hyundai WIA E160C is $45,000 - $65,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Hyundai WIA; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hyundai-wia-e160c#price; the request is passed to Hyundai WIA or an authorised dealer.
An 8 in (203 mm) chuck and 64.4 / 126 N·m (47.5 / 92.9 ft-lbf) of spindle torque from an 11 / 7.5 kW (14.8 / 10.1 hp) motor. Maximum spindle speed is 4,000 rpm and the drive is by belt.
The two share a motor rating of 11 / 7.5 kW (14.8 / 10.1 hp). The E160A turns that into 6,000 rpm and 35.8 / 70 N·m (26.4 / 51.6 ft-lbf). The E160C delivers 4,000 rpm and 64.4 / 126 N·m (47.5 / 92.9 ft-lbf). Lower speed with higher torque from the same power is consistent with a lower drive ratio, chosen to suit the larger chuck.
Both use an 8 in (203 mm) chuck. The SE2200 Series is listed with 15 / 11 kW (20.1 / 14.8 hp), 167 / 92 N·m (123.2 / 67.9 ft-lbf), 4,500 rpm, 12 stations and a 350 mm (13.8 in) turning diameter. The E160C has 11 / 7.5 kW (14.8 / 10.1 hp), 4,000 rpm, 10 stations and 280 mm (11 in). X and Z rapids are 30 / 30 m/min (1,181 / 1,181 ipm) on the E160C.
Short, larger-diameter parts. Turning diameter and turning length both top out at 280 mm (11 in), with 165 mm (6.5 in) of X travel and 330 mm (13 in) of Z. Long shafts are outside what the table supports, while discs, flanges and rings held in the 8 in (203 mm) chuck are well inside it.
