The Hyundai-WIA Hyundai WIA HD2208/2600 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA HD2208/2600 CNC lathe: 10 in chuck, 460 mm machining diameter, 659 mm length, 26 / 18.5 kW spindle with 734 Nm, 10 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 26.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 10 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Spindle Motor Power | 26 / 18.5 kW |
| Spindle Drive | Belt |
| Rapid Traverse X | 24 m/min (945 ipm) |
| Rapid Traverse Z | 30 m/min (1,181 ipm) |
| Live Tool Speed | 6,000 RPM (M variants only) |
| Chuck Size | 10 in |
| Max Machining Diameter | 460 mm |
| Max Machining Length | 659 mm |
| Rapid Traverse Xz | 24 / 30 m/min |
| Spindle Drive Type | Belt |
| Spindle Torque | 734 / 522 Nm |
| Tool Capacity | 10 |
| Travel Xz | 265 / 680 mm |
| Catalogue Models | HD2600 (HD2208 not in the current WIA catalogue) |
Our best estimate for the Hyundai WIA HD2208/2600 is $55,000 - $100,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Hyundai WIA; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hyundai-wia-hd22082600#price; the request is passed to Hyundai WIA or an authorised dealer.
No. Of the two models named on this page, the current Hyundai WIA catalogue has the HD2600; the HD2208 is not in it. Anyone looking at an HD2208 is therefore looking at an older machine and should confirm its figures against that machine's own documentation, not assume they match the table here.
734 / 522 Nm from a 26 / 18.5 kW motor, through a belt drive. For comparison, the 8 in HD2200 is listed at 206 / 125.3 Nm and 18.5 / 15 kW. The higher torque is what allows deep cuts at the larger diameters a 10 in chuck holds.
Only on M variants. The table lists a live tool speed of 6,000 RPM and marks it as applying to M variants only. If milling flats, cross-drilling or tapping off-centre is part of the job, make sure the machine quoted is one of those variants.
X travel is 265 mm and Z travel is 680 mm. Rapids are 24 m/min (945 ipm) in X and 30 m/min (1,181 ipm) in Z. Maximum machining diameter is 460 mm and maximum machining length is 659 mm.
They share the spindle figures. The HD3100A/MA is listed with the same 10 in chuck, 26 / 18.5 kW and 734 / 522 Nm, and with 265 / 830 mm of X / Z travel against 265 / 680 mm here. If the part is too long for 659 mm of machining length, that is the model to look at.
