The Hyundai-WIA Hyundai WIA HD3100LY/LYA is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA HD3100LY/LYA: Y-axis lathe with 265 / 120 / 1,350 mm travels, 1,280 mm machining length, 420 mm diameter, 26 / 18.5 kW.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 26.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Spindle Motor Power | 26 / 18.5 kW |
| Spindle Drive | Belt |
| Bed Angle | 30 degrees |
| Chuck Size | HD3100LY: 12 in; HD3100LYA: 10 in |
| Max Machining Diameter | 420 mm |
| Max Machining Length | 1280 mm |
| Rapid Traverse Xyz | 24 / 10 / 30 m/min |
| Spindle Drive Type | Belt |
| Tool Capacity | 12 |
| Travel Xyz | 265 / 120 / 1350 mm |
| Catalogue Models | HD3100LY, HD3100LYA |
Our best estimate for the Hyundai WIA HD3100LY/LYA is $160,000 - $230,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Hyundai WIA; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hyundai-wia-hd3100lylya#price; the request is passed to Hyundai WIA or an authorised dealer.
Chuck size is the only difference Hyundai WIA's table shows: 12 in on the HD3100LY and 10 in on the HD3100LYA. Travels of 265 / 120 / 1,350 mm, the 26 / 18.5 kW spindle power, the 12 tools and the rapids are listed once for both. Ask for the spindle speed and torque of each, since the table gives neither.
It is longer and has a Y axis. Z travel is 1,350 mm against 830 mm (32.7 in) on the HD3100 Series, and there is 120 mm of Y travel. X travel is 265 mm on both. Maximum machining diameter is 420 mm, where the HD3100 Series turns 500 mm (19.7 in).
Maximum machining length is 1,280 mm on 1,350 mm of Z travel, and maximum machining diameter is 420 mm. Parts near full length are slender relative to the chuck, so confirm the tailstock and any steady rest with Hyundai WIA; the table does not list them.
24 m/min in X, 10 m/min in Y and 30 m/min in Z. At 30 m/min the carriage covers the 1,350 mm Z stroke quickly enough that tool changes at the far end of a long shaft are not a major part of the cycle. Y moves are short, 120 mm at most, so the lower Y rate costs little.
