The Hyundai-WIA Hyundai WIA KBN135 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Fanuc 0i-MF Plus. a top spindle speed of 2,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA KBN135 boring machine: 135 mm spindle, 2,000 x 1,800 mm table, 10,000 kg load, 3,000 mm X travel, 2,000 RPM BT50. An older model.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Fanuc 0i-MF Plus |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 2,000 RPM |
| Spindle Taper Interface | BT50 |
| Table / Platter / Chuck Size | 2,000 x 1,800 mm (78.7 x 70.9 in) |
| Max Table Load Capacity | 10,000 kg |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Spindle Diameter | 135 mm (5.3 in) |
| Table Size | 2,000 x 1,800 mm (78.7 x 70.9 in) |
| X-Axis Travel | 3,000 mm (118 in) |
| Y-Axis Travel | 2,000 mm (78.7 in) |
| Z-Axis Travel | 1,600 mm (63 in) |
| Travel W | 700 mm (27.6 in) |
| Max Spindle Speed | 2,000 RPM |
| Spindle Taper | BT50 |
| Spindle Drive | Gear (3-step) |
| Guideway Type | Box guideways |
| Tool Capacity | 40 tools |
| Rapid Traverse | 8/8/8 m/min (315 ipm) |
| Max Table Load | 10,000 kg (22,046 lb) |
| CNC Control | Fanuc 0i-MF Plus |
Our best estimate for the Hyundai WIA KBN135 is $500,000 - $800,000. This is an estimate for a cnc boring machines in this class, not a quote from Hyundai WIA; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hyundai-wia-kbn135#price; the request is passed to Hyundai WIA or an authorised dealer.
No. The KBN135 is not in the current lineup, so it is a machine found used. A current boring machine with the same table size is the KBN1300C, which has a 2,000 x 1,800 mm (78.7 x 70.9 in) table and 3,000 mm (118 in) of X travel with a 2,500 rpm spindle and 60 tools.
In the listed figures, table load and rapid rate. The KBN135 is listed at 10,000 kg (22,046 lb) and 8/8/8 m/min (315 ipm). The KBN135C is listed at 15,000 kg (33,069 lb), with 20,000 kg (44,092 lb) optional, and 10/10/10 m/min (394 ipm). Table size, travels, spindle diameter, taper and tool count are listed the same for both.
The table is 2,000 x 1,800 mm (78.7 x 70.9 in). Listed travels are 3,000 mm (118 in) in X, 2,000 mm (78.7 in) in Y, 1,600 mm (63 in) in Z and 700 mm (27.6 in) in W. These are listed figures for a model no longer in the lineup, so measure the strokes on the machine you are inspecting.
Start from the listed figures. Run the spindle through all three gear steps up to 2,000 RPM, move each axis over its full listed travel, and read the table load from the machine's plate, since 10,000 kg (22,046 lb) is listed for the KBN135 and 15,000 kg (33,069 lb) for the KBN135C. The spindle motor rating is not listed, so take it from the motor plate.
