The Hyundai-WIA Hyundai WIA KF4600 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the FANUC 0i-MF Plus. a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA KF4600 vertical machining center: 600 x 460 x 510 mm travels, 12,000 RPM BT40 direct-drive spindle, 24 tools. Older model, listed figures.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | FANUC 0i-MF Plus |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | BT40 |
| Approx. Machine Weight | 7,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Travel | 600 mm (23.6 in) |
| Y Travel | 460 mm (18.1 in) |
| Z Travel | 510 mm (20.1 in) |
| Max Spindle Speed | 12,000 RPM |
| Spindle Taper | BT40 |
| Spindle Type | Inline direct drive |
| Atc Capacity | 24 tools |
| Atc Type | Arm-type ATC |
| Guideway Type | Linear roller guides |
| Rapid Traverse | 48 m/min (1,890 ipm) |
| Positioning Accuracy | ±0.005 mm (±0.0002 in) |
| Repeatability | ±0.003 mm (±0.00012 in) |
| Machine Weight | 7,500 kg (16,535 lb) |
| CNC Control | FANUC 0i-MF Plus |
Our best estimate for the Hyundai WIA KF4600 is $100,000 - $140,000. This is an estimate for a vertical machining centers (vmc) in this class, not a quote from Hyundai WIA; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hyundai-wia-kf4600#price; the request is passed to Hyundai WIA or an authorised dealer.
The listed figures are 600 mm (23.6 in) in X, 460 mm (18.1 in) in Y and 510 mm (20.1 in) in Z. No table size or table load is listed, so measure the table and check the load rating on the machine itself.
A BT40 inline direct-drive spindle listed at 12,000 RPM. The table does not give power or torque. For a used machine, the spindle motor plate and a test cut tell you more than the listed speed alone.
No. It is not in Hyundai WIA's current lineup, which points to an older model. The listed figures are unconfirmed, so treat them as a description to verify. Nearby KF models include the KF5700B II Series, listed with 1100 mm (43.3 in) of X travel.
The listed positioning accuracy is ±0.005 mm (±0.0002 in) and repeatability is ±0.003 mm (±0.00012 in). The table does not say which standard those values were measured to, and on a used machine the real figures depend on wear, so ask for a recent ballbar or laser report.
