The Hyundai-WIA Hyundai WIA KF5 (Standard Type) is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the FANUC 0i-MF Plus. a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA KF5 (Standard Type): BT40 inline direct-drive spindle at 12,000 RPM, 800 x 450 x 510 mm travels, 600 kg (1,323 lb) table load, 24 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | FANUC 0i-MF Plus |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | BT40 |
| Approx. Machine Weight | 5,800 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 800 mm (31.5 in) |
| Y-Axis Travel | 450 mm (17.7 in) |
| Z-Axis Travel | 510 mm (20.1 in) |
| Table Load Max | 600 kg (1,323 lb) |
| Max Spindle Speed | 12,000 RPM |
| Spindle Taper | BT40 |
| Spindle Drive | Inline direct drive |
| Atc Capacity | 24 tools |
| Atc Type | Servo-driven arm type |
| Rapid Traverse | 48 m/min (1,890 ipm) |
| Guideway Type | Linear roller guideways |
| Positioning Accuracy | ±0.005 mm (±0.0002 in) |
| Repeatability | ±0.003 mm (±0.00012 in) |
| CNC Control | FANUC 0i-MF Plus |
| Machine Weight | 5,800 kg (12,787 lb) |
Our best estimate for the Hyundai WIA KF5 (Standard Type) is $80,000 - $120,000. This is an estimate for a vertical machining centers (vmc) in this class, not a quote from Hyundai WIA; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hyundai-wia-kf5standard-type#price; the request is passed to Hyundai WIA or an authorised dealer.
A BT40 inline direct-drive spindle with a listed maximum of 12,000 RPM. Power and torque are not listed. Because the drive is direct, there is no gear range for low-speed torque, so the motor rating matters for heavy cuts.
The KF5700B II Series is larger and slower in the axes: 1,100 mm (43.3 in) of X travel, a 1,000 kg (2,205 lb) table load and 30 / 30 / 24 m/min rapids, with 8,000 rpm standard. The KF5 (Standard Type) is listed with 800 mm (31.5 in) of X, 600 kg (1,323 lb), 48 m/min rapids and 12,000 RPM.
The listed positioning accuracy is ±0.005 mm (±0.0002 in) and the listed repeatability is ±0.003 mm (±0.00012 in). The axes run on linear roller guideways. The standard those figures were measured to is not stated.
X, Y and Z travels are 800 mm (31.5 in), 450 mm (17.7 in) and 510 mm (20.1 in). The table is rated for 600 kg (1,323 lb), and the machine weighs 5,800 kg (12,787 lb). The control is FANUC 0i-MF Plus.
