The Hyundai-WIA Hyundai WIA KH50G is an industrial-grade CNC Horizontal Machining Centers (HMC) powered by the Standard CNC. a top spindle speed of 4,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA KH50G horizontal machining center: 500 × 500 mm pallet, BT50 gearbox spindle, 4,500 rpm, 901 / 730 N·m, 760 x 705 x 650 mm travels.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Horizontal Machining Centers (HMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,500 RPM |
| Spindle Motor Rating | 18.5 kW |
| Spindle Taper Interface | BT50 |
| Max Table Load Capacity | 2 kg |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Pallet Size | 500×500 |
| X-Axis Travel | 760 mm (29.9 in) |
| Y-Axis Travel | 705 mm (27.8 in) |
| Z-Axis Travel | 650 mm (25.6 in) |
| Max Spindle Speed | 4,500 rpm |
| Spindle Taper | BT50 |
| Spindle Drive | GEAR BOX |
| Tool Capacity | 40 tools |
| Pallet Changer | 2-pallet shuttle APC |
| Rapid Traverse | X/Y/Z: 20 / 20 / 20 m/min (787 / 787 / 787 ipm) |
| Max Workpiece Weight | 800 kg (1,764 lb) |
| Max Table Load | 2 - 800 |
| Spindle Motor Power | 18.5 / 15 kW (24.8 / 20.1 hp) |
| Spindle Torque | 901 / 730 N·m (664.6 / 538.4 ft-lbf) |
Our best estimate for the Hyundai WIA KH50G is $280,000 - $400,000. This is an estimate for a horizontal machining centers (hmc) in this class, not a quote from Hyundai WIA; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hyundai-wia-kh50g#price; the request is passed to Hyundai WIA or an authorised dealer.
901 / 730 N·m (664.6 / 538.4 ft-lbf), with 18.5 / 15 kW (24.8 / 20.1 hp) of power. The spindle is driven through a gearbox, has a BT50 taper and a maximum speed of 4,500 rpm. WIA's table gives the two values in each row without saying which rating each one is.
The pallet is 500 × 500 mm and the maximum workpiece weight is 800 kg (1,764 lb). Axis travels are 760 mm (29.9 in) in X, 705 mm (27.8 in) in Y and 650 mm (25.6 in) in Z. The table does not list a maximum workpiece diameter or height, so check the swing clearance for tall fixtures.
Yes. It is listed with a 2-pallet shuttle APC, and the table-load row reads 2 - 800, matching the 800 kg (1,764 lb) workpiece weight on each of the two pallets. The table gives no pallet change time.
The KH1000 is far larger, with travels of 2,100 mm (82.7 in), 1,350 mm (53.1 in) and 1,400 mm (55.1 in) and a 60-tool magazine, and it runs to 8,000 rpm. Both rapid at 20 / 20 / 20 m/min. The KH50G has the higher torque figure, 901 / 730 N·m against the KH1000's 807 / 686 N·m.
It will cut it, but the figures are not aimed at it. Maximum spindle speed is 4,500 rpm and rapids are 20 / 20 / 20 m/min (787 / 787 / 787 ipm), so small tools cannot reach useful surface speeds and non-cutting time is long. The 901 / 730 N·m of torque is where this machine earns its place.
