The Hyundai-WIA Hyundai WIA KIT4500 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA KIT4500: 6 in chuck lathe, 165 mm (6.5 in) turning diameter, 300 mm length, 6,000 rpm, 15 / 11 kW, 6 tools, 36 m/min Z rapid.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 6 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 165 mm (6.5 in) |
| Max Spindle Speed | 6,000 rpm |
| Spindle Motor Power | 15 / 11 kW (20.1 / 14.8 hp) |
| Turret Stations | 6 |
| Spindle Drive | Belt |
| Chuck Size | 6 in (152 mm) |
| Max Turning Length | 300 mm (11.8 in) |
| X-Axis Travel | 450 mm (17.7 in) |
| Z-Axis Travel | 300 mm (11.8 in) |
| Rapid Traverse | X/Z: 30 / 36 m/min (1,181 / 1,417 ipm) |
| Spindle Torque | 95.5 / 70 N·m (70.4 / 51.6 ft-lbf) |
| Tool Capacity | 6 tools |
Our best estimate for the Hyundai WIA KIT4500 is $45,000 - $65,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Hyundai WIA; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hyundai-wia-kit4500#price; the request is passed to Hyundai WIA or an authorised dealer.
Up to 165 mm (6.5 in) in diameter and 300 mm (11.8 in) long, held in a 6 in (152 mm) chuck. Z travel is 300 mm (11.8 in), the same as the turning length, so long drills and boring bars eat directly into the length of part you can reach.
The table does not explain it. It lists 450 mm (17.7 in) in X and 300 mm (11.8 in) in Z with a 165 mm (6.5 in) maximum turning diameter, so most of the X stroke is not needed to reach the centreline of the largest part. Ask Hyundai WIA how tooling is positioned along X, because that layout decides which tool combinations clear the chuck and the workpiece.
The table lists 6 turret stations and a tool capacity of 6 tools. Count your operations before choosing it: turning, facing, grooving, threading, drilling and boring take all six, with nothing left for a duplicate insert on long unattended runs.
15 / 11 kW (20.1 / 14.8 hp) and 95.5 / 70 N·m (70.4 / 51.6 ft-lbf), belt-driven, with a 6,000 rpm top speed. The pairs are not labelled in the table; treat the lower figure of each as the one to plan sustained cuts on. This is a spindle for speed on small diameters, not for deep cuts.
Rapid traverse is 30 m/min (1,181 ipm) in X and 36 m/min (1,417 ipm) in Z. With only 300 mm (11.8 in) of Z travel, non-cutting moves are short, which helps most on parts with cycle times measured in seconds.
