The Hyundai-WIA Hyundai WIA L300A/MA/MSA is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA L300A/MA/MSA: 10 in chuck lathes with 290 / 750 mm X / Z travel, 22 / 18.5 kW, 12 tools, gear drive on L300A, belt on MA and MSA.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Spindle Motor Power | 22 / 18.5 kW |
| Spindle Drive | Gear (L300A) / Belt (MA/MSA) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Z | 24 m/min (945 ipm) |
| Chuck Size | 10 in |
| Rapid Traverse Xz | L300A: 20 / 24 m/min; L300MA: 20 / 24 m/min; L300MSA: 20 / 24 / 20 m/min |
| Spindle Drive Type | L300A: GEAR; L300MA: Belt; L300MSA: Belt |
| Tool Capacity | 12 |
| Travel Xz | 290 / 750 mm |
| Catalogue Models | L300A, L300MA, L300MSA |
Our best estimate for the Hyundai WIA L300A/MA/MSA is $65,000 - $150,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Hyundai WIA; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hyundai-wia-l300amamsa#price; the request is passed to Hyundai WIA or an authorised dealer.
The table shows two differences. The L300A has a gear-driven spindle, while the L300MA and L300MSA are belt-driven. And the L300MSA lists three rapid figures, 20 / 24 / 20 m/min, where the other two list 20 / 24 m/min. Spindle power of 22 / 18.5 kW, the 10 in chuck, 12 tools and 290 / 750 mm of travel are common to all three.
It depends on where your cutting happens. Gear drives are usually picked for heavy cuts at low spindle speed, belt drives for quieter running at higher speed. Hyundai WIA's table gives 22 / 18.5 kW for both and no torque or speed for either, so the choice cannot be made from the table alone: get the torque curve of each.
By Z travel. This group lists 290 / 750 mm of X / Z travel and the L300LA/LMA/LMSA lists 290 / 1,350 mm. Spindle power, the 10 in chuck, the 12 tools and the rapids are the same in both tables, and both have one gear-driven model and two belt-driven ones.
The row reads 20 / 24 / 20 m/min for the L300MSA against 20 / 24 m/min for the L300A and L300MA. A third rapid means a third moving axis, at 20 m/min. The table is headed for X and Z only and does not say what the axis is or how far it travels, so ask Hyundai WIA to specify it.
