The Hyundai-WIA Hyundai WIA L300MC/LMC/MSC is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA L300MC/LMC/MSC: belt-driven 12 in chuck lathes, 22 / 18.5 kW, 787.3 / 465 Nm, 500 mm machining diameter, 12 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Spindle Motor Power | 22 / 18.5 kW |
| Spindle Drive | Belt |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Z | 24 m/min (945 ipm) |
| Chuck Size | 12 in |
| Max Machining Diameter | 500 mm |
| Rapid Traverse Xz | L300MC: 20 / 24 m/min; L300LMC: 20 / 24 m/min; L300MSC: 20 / 24 / 20 m/min |
| Spindle Drive Type | Belt |
| Spindle Torque | 787.3 / 465 Nm |
| Tool Capacity | 12 |
| Catalogue Models | L300MC, L300LMC, L300MSC |
Our best estimate for the Hyundai WIA L300MC/LMC/MSC is $110,000 - $170,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Hyundai WIA; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hyundai-wia-l300mclmcmsc#price; the request is passed to Hyundai WIA or an authorised dealer.
787.3 / 465 Nm, with 22 / 18.5 kW through a belt drive. The pair is unlabelled in Hyundai WIA's table. If the lower value is the continuous rating, as is usual, then sustained cuts should be planned on 465 Nm and the higher value kept for short heavy passes.
The L300C/LC, which lists 1,131 / 957 Nm and 26 / 22 kW through a gear drive against 787.3 / 465 Nm and 22 / 18.5 kW here, and machines 560 mm where this group machines 500 mm. Both use a 12 in chuck and carry 12 tools, so the belt-driven group is the choice when that torque is not needed.
Very little in the table. All three share the spindle, the 12 in chuck, 500 mm of machining diameter and 12 tools. The L300MC and L300LMC both list 20 / 24 m/min rapids and no travels, so their difference is not shown. The L300MSC lists 20 / 24 / 20 m/min, which indicates an extra axis.
500 mm, on a 12 in chuck. The L300C/LC, the geared 12 in model, reaches 560 mm. Machining length is not listed for this group, so ask for it together with the Z travel of each model.
