The Hyundai-WIA Hyundai WIA L600LA/LMA is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA L600LA/LMA: shaft lathe with 3,250 mm machining length, 920 mm diameter, 18 in chuck, 45 / 37 kW and 5,610 / 4,621 Nm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 45.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Spindle Motor Power | 45 / 37 kW |
| Spindle Drive | Gear |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Z | 12 m/min (472 ipm) |
| Chuck Size | 18 in |
| Max Machining Diameter | 920 mm |
| Max Machining Length | 3250 mm |
| Rapid Traverse Xz | 12 / 12 m/min |
| Spindle Drive Type | Belt + 3 Step Gear |
| Spindle Torque | 5,610 / 4,621 Nm |
| Tool Capacity | 12 |
| Travel Xz | 500 / 3,280 mm |
| Catalogue Models | L600LA, L600LMA |
Our best estimate for the Hyundai WIA L600LA/LMA is $250,000 - $350,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Hyundai WIA; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hyundai-wia-l600lalma#price; the request is passed to Hyundai WIA or an authorised dealer.
Maximum machining length is 3,250 mm and maximum machining diameter 920 mm. Travels are 500 mm in X and 3,280 mm in Z, and the chuck is 18 in. The table gives no weight limit between centres, which on parts of this size is as much a constraint as the dimensions.
The motor drives the spindle through a belt and a gearbox with three steps. Each step trades speed for torque, so the listed 5,610 / 4,621 Nm is available in the lowest step and higher speeds in the upper ones. Hyundai WIA's table states 45 / 37 kW but no spindle speeds, so request the speed and torque of each step.
Chuck and torque. This machine has an 18 in chuck and 5,610 / 4,621 Nm. The L700LA/LMA has a 24 in chuck and 6,978 / 5,700 Nm. Both list 45 / 37 kW, 12 tools and 12 m/min (472 ipm) rapids.
12 m/min (472 ipm) in X and in Z. For comparison the much smaller L300C/LC lists 20 m/min (787 ipm) in X and 24 m/min (945 ipm) in Z. On a 3,280 mm bed the lower rate adds up, so keep long repositioning moves out of the program where you can.
