The Hyundai-WIA Hyundai WIA L700LA/LMA is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA L700LA/LMA: 24 in chuck shaft lathe, 6,978 / 5,700 Nm, 45 / 37 kW, 920 mm diameter, 3,250 mm machining length.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 45.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Spindle Motor Power | 45 / 37 kW |
| Spindle Drive | Gear |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Z | 12 m/min (472 ipm) |
| Chuck Size | 24 in |
| Max Machining Diameter | 920 mm |
| Max Machining Length | 3250 mm |
| Rapid Traverse Xz | 12 / 12 m/min |
| Spindle Drive Type | Belt + 3 Step Gear |
| Spindle Torque | 6,978 / 5,700 Nm |
| Tool Capacity | 12 |
| Travel Xz | 500 / 3280 mm |
| Catalogue Models | L700LA, L700LMA |
Our best estimate for the Hyundai WIA L700LA/LMA is $300,000 - $400,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Hyundai WIA; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hyundai-wia-l700la-lma#price; the request is passed to Hyundai WIA or an authorised dealer.
Not in envelope. The L700LA/LMA lists 920 mm of machining diameter, 3,250 mm of machining length and 500 / 3,280 mm of travel, and the L600LA/LMA lists the same figures. Spindle power is 45 / 37 kW on both. What grows is the chuck, 24 in against 18 in on the L600LA/LMA, and the torque.
It lists 6,978 / 5,700 Nm. The L600LA/LMA lists 5,610 / 4,621 Nm, so the L700 is about 24% higher on the first figure and about 23% higher on the second. Both are rated 45 / 37 kW.
Belt + 3 Step Gear: a belt from the motor into a gearbox with three steps. The lowest step gives the listed 6,978 / 5,700 Nm, and the higher steps give speed for smaller diameters. The table does not state the spindle speed of any step, so ask Hyundai WIA for the full chart.
Everything about supporting and moving the workpiece. The table lists a 3,250 mm machining length and a 24 in chuck but no tailstock, steady rest, permitted workpiece weight or machine weight. Foundation, crane capacity and floor space all depend on those figures, so have them supplied with the quotation.
