The Hyundai-WIA Hyundai WIA LM1800TTSY is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 5,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA LM1800TTSY: twin-turret, twin-spindle lathe with upper-turret Y axis, 230 mm (9.1 in) x 673 mm (26.5 in) turning, 5,000 rpm, 2 x 12 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 5,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 2 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 230 mm (9.1 in) |
| Max Turning Length | 673 mm (26.5 in) |
| Chuck Size | 8 in (203 mm) |
| Sub Spindle Speed | 5,000 RPM |
| Upper Turret | 12 stations, live tooling, Y-axis |
| Lower Turret | 12 stations, turning |
| Live Tool Speed | 5,000 rpm |
| Travel Axes | X1/Z1/Y/X2/Z2/A: 165 / 700 / 100 / 195 / 720 / 668 mm (6.5 / 27.6 / 3.9 / 7.7 / 28.3 / 26.3 in) |
| Rapid Traverse | X1/Z1/Y/X2/Z2/A: 20 / 40 / 7.5 / 20 / 40 / 40 m/min (787 / 1,575 / 295 / 787 / 1,575 / 1,575 ipm) |
| Max Spindle Speed | 5,000 rpm |
| Spindle Motor Power | 22 / 11 kW (29.5 / 14.8 hp) |
| Spindle Torque | 358 / 118 N·m (264.1 / 87 ft-lbf) |
| Spindle Drive | Built in |
| Tool Capacity | 2 x 12 tools |
Our best estimate for the Hyundai WIA LM1800TTSY is $180,000 - $280,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Hyundai WIA; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hyundai-wia-lm1800ttsy#price; the request is passed to Hyundai WIA or an authorised dealer.
The upper turret. Hyundai WIA lists it as 12 stations with live tooling and a Y axis, while the lower turret is listed as 12 stations for turning. Y travel is 100 mm (3.9 in) and live tools run to 5,000 rpm, so all milling and off-centre drilling has to be programmed on the upper turret.
X1/Z1/Y/X2/Z2/A travel is 165 / 700 / 100 / 195 / 720 / 668 mm (6.5 / 27.6 / 3.9 / 7.7 / 28.3 / 26.3 in). Rapid traverse on the same axes is 20 / 40 / 7.5 / 20 / 40 / 40 m/min (787 / 1,575 / 295 / 787 / 1,575 / 1,575 ipm).
Both the main spindle and the sub-spindle are listed at 5,000 RPM with a built-in drive. Power is given as 22 / 11 kW (29.5 / 14.8 hp) and torque as 358 / 118 N·m (264.1 / 87 ft-lbf). The table does not state which figure belongs to which spindle or rating.
230 mm (9.1 in) in diameter and 673 mm (26.5 in) in length, held in an 8 in (203 mm) chuck. For larger work the LM2500TTSY II is listed with a 390 mm (15.4 in) turning diameter, 900 mm (35.4 in) turning length and a 10 in (254 mm) chuck.
The LM1800TTSY has a Y axis on the upper turret only. The LM2200TTSYY/TTSYYC is listed with a Y1 axis on the upper turret and a Y2 axis on the lower, and with spindle power of 18.5 / 15 kW against 22 / 11 kW (29.5 / 14.8 hp) here. Both carry 2 x 12 tools.
