The Hyundai-WIA Hyundai WIA XF2000i is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 24,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA XF2000i small 5-axis machining center: 300 x 300 x 200 mm travels, 24,000 rpm HSK-E40 spindle, 50 kg part limit, 50 m/min rapids.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 24,000 RPM |
| Spindle Motor Rating | 12.5 kW |
| Spindle Taper Interface | HSK-E40 |
| Table / Platter / Chuck Size | Ø260 mm (10.2 in) |
| Max Table Load Capacity | 50 kg |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Diameter | 200 mm (7.9 in) |
| X-Axis Travel | 300 mm (11.8 in) |
| Y-Axis Travel | 300 mm (11.8 in) |
| Z-Axis Travel | 200 mm (7.9 in) |
| Max Spindle Speed | 24,000 rpm |
| Spindle Taper | HSK-E40 |
| Max Workpiece Height | 200 mm (7.9 in) |
| Table Size | Ø260 mm (10.2 in) |
| Max Table Load | 50 kg (110 lb) |
| Rapid Traverse | X/Y/Z: 50 / 50 / 50 m/min (1,968 / 1,968 / 1,968 ipm) |
| Spindle Motor Power | 12.5 / 8 kW (16.8 / 10.7 hp) |
| Spindle Torque | 9.3 / 6 N·m (6.9 / 4.4 ft-lbf) |
| Spindle Drive | BUILT-IN |
| Tool Capacity | 20 : Pick up Type tools (40 : Chain Type optional) |
| Slide Type | ROLLER |
Our best estimate for the Hyundai WIA XF2000i is $300,000 - $450,000. This is an estimate for a 5-axis machining centers in this class, not a quote from Hyundai WIA; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hyundai-wia-xf2000i#price; the request is passed to Hyundai WIA or an authorised dealer.
Travels are 300 mm (11.8 in) in X, 300 mm (11.8 in) in Y and 200 mm (7.9 in) in Z. The workpiece can be up to 200 mm (7.9 in) tall and 50 kg (110 lb). Since part height and Z travel are the same figure, the realistic height of a part depends on how long the tools reaching it are.
A built-in spindle that runs to 24,000 rpm on an HSK-E40 taper, rated 12.5 / 8 kW (16.8 / 10.7 hp) with 9.3 / 6 N·m (6.9 / 4.4 ft-lbf) of torque. It is the only spindle Hyundai WIA lists for this model. The low torque means it is meant for small cutters at high speed, not for large face mills or drills.
The standard magazine is a pick-up type holding 20 tools. A chain type magazine holding 40 tools is optional. If a job needs more than 20 tools plus probes or duplicates for unattended running, specify the chain magazine when ordering.
The XF6300 is far larger: 650 mm (25.6 in) of X, 600 mm (23.6 in) of Y and 500 mm (19.7 in) of Z, with a 600 kg (1,323 lb) table load. The XF6300's standard spindle is 15,000 rpm on HSK-A63 at 153 / 123 N·m (112.9 / 90.7 ft-lbf), against 24,000 rpm on HSK-E40 at 9.3 / 6 N·m (6.9 / 4.4 ft-lbf) here. The XF2000i is the choice only when the parts are small and light.
