The Hyundai-WIA Hyundai WIA XF8500 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 15,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA XF8500 5-axis machining center: Ø850 mm table, 1,000 kg load, 850 x 920 x 600 mm travels, +30°/-120° A axis, 15,000 rpm HSK-A63.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 15,000 RPM |
| Spindle Motor Rating | 31.0 kW |
| Spindle Taper Interface | HSK-A63 (30K : HSK-E40 optional) |
| Table / Platter / Chuck Size | Ø850 mm (33.5 in) |
| Max Table Load Capacity | 1,000 kg |
| Automatic Tool Changer (ATC) | 34 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Diameter | 850 mm (33.5 in) |
| X-Axis Travel | 850 mm (33.5 in) |
| Y-Axis Travel | 920 mm (36.2 in) |
| Z-Axis Travel | 600 mm (23.6 in) |
| A Axis Range | +30° / -120° |
| Max Spindle Speed | 15,000 rpm (9,000 rpm, 24,000 rpm, 30,000 rpm optional) |
| Spindle Taper | HSK-A63 (30K : HSK-E40 optional) |
| Max Workpiece Diameter | 1,000 mm (39.4 in) |
| Atc Capacity | 90 tools (120 optional) |
| Table Size | Ø850 mm (33.5 in) |
| Max Table Load | 1,000 kg (2,205 lb) |
| Rapid Traverse | X/Y/Z: 45 / 45 / 45 m/min (1,772 / 1,772 / 1,772 ipm) |
| Spindle Motor Power | 31 / 25 kW (41.6 / 33.5 hp) (42 / 31 kW (56.3 / 41.6 hp), 26 / 20 kW (34.9 / 26.8 hp), 120 / 80 kW (160.9 / 107.3 hp) optional) |
| Spindle Torque | 153 / 123 N·m (112.9 / 90.7 ft-lbf) (175 / 130 N·m (129.1 / 95.9 ft-lbf), 85.9 / 66.5 N·m (63.4 / 49.1 ft-lbf), 38.2 / 25.5 N·m (28.2 / 18.8 ft-lbf) optional) |
| Spindle Drive | BUILT-IN |
| Tool Capacity | 34, tools (68, 102 optional) |
Our best estimate for the Hyundai WIA XF8500 is $700,000 - $1,000,000. This is an estimate for a 5-axis machining centers in this class, not a quote from Hyundai WIA; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hyundai-wia-xf8500#price; the request is passed to Hyundai WIA or an authorised dealer.
Up to 1,000 mm (39.4 in) in diameter and 1,000 kg (2,205 lb), on a table Ø850 mm (33.5 in) across. The part can therefore overhang the table. Linear travels are 850 mm (33.5 in) in X, 920 mm (36.2 in) in Y and 600 mm (23.6 in) in Z, so check that the features you need to reach on a full-diameter part fall inside those strokes at the tilt angles you plan to use.
+30° to -120°. The long direction tilts the table past vertical, which gives access to the side of a part and a little beyond. The short direction is limited to 30°, so 5-sided work has to be oriented so that the deep tilt does the reaching.
The standard spindle is 15,000 rpm on HSK-A63, rated 31 / 25 kW (41.6 / 33.5 hp) and 153 / 123 N·m (112.9 / 90.7 ft-lbf). Options are 9,000 rpm, 24,000 rpm and 30,000 rpm. The first two option ratings are listed as 42 / 31 kW (56.3 / 41.6 hp) with 175 / 130 N·m (129.1 / 95.9 ft-lbf), and 26 / 20 kW (34.9 / 26.8 hp) with 85.9 / 66.5 N·m (63.4 / 49.1 ft-lbf). The third option torque is 38.2 / 25.5 N·m (28.2 / 18.8 ft-lbf), and the 30,000 rpm spindle uses HSK-E40. Have the pairing of speed and rating confirmed on the quotation.
When the part outgrows the XF6300, which is limited to 600 kg (1,323 lb) on a Ø630 mm (24.8 in) table with 650 mm (25.6 in) of X. The XF8500 carries 1,000 kg (2,205 lb) with 850 mm (33.5 in) of X and 920 mm (36.2 in) of Y, and it adds a higher-torque spindle option listed at 175 / 130 N·m (129.1 / 95.9 ft-lbf). The XF6300 keeps the advantage in rapid rate, at 60 / 60 / 60 m/min (2,362 / 2,362 / 2,362 ipm).
