The Makino a82 is an industrial-grade CNC Horizontal Machining Centers (HMC) powered by the Makino Professional 6 (Fanuc-based). a top spindle speed of 8,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino a82 older 630 mm HMC: 900 mm travels, 8,000 RPM spindle (10,000 optional) with 588 Nm, 1,500 kg pallets. Third-party listed figures.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | CNC Horizontal Machining Centers (HMC) |
| CNC Controller System | Makino Professional 6 (Fanuc-based) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 8,000 RPM |
| Spindle Motor Rating | 37.0 kW |
| Spindle Taper Interface | HSK-A100 |
| Automatic Tool Changer (ATC) | 80 Tool Stations |
| Approx. Machine Weight | 32,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 900 mm (35.4 in) |
| Y-Axis Travel | 900 mm (35.4 in) |
| Z-Axis Travel | 900 mm (35.4 in) |
| Pallet Size | 630 x 630 mm (24.8 x 24.8 in) |
| Number Of Pallets | 2 (expandable via MMC2 pallet pool) |
| Pallet Load Capacity | 1,500 kg (3,307 lb) |
| Max Workpiece Size | 1,200 mm dia x 1,400 mm tall |
| Max Spindle Speed | 8,000 RPM (10,000 RPM optional) |
| Spindle Taper | HSK-A100 |
| Spindle Motor Power | 37 kW (50 hp) |
| Spindle Torque | 588 Nm (434 ft-lb) |
| B Axis | Direct-drive, 0.001° indexing |
| Tool Capacity | 80 (expandable to 160/240) |
| Tool To Tool | 2.5 sec |
| Chip To Chip | 5.5 sec |
| Rapid Traverse | 50 m/min (1,969 ipm) |
| Positioning Accuracy | ±0.004 mm |
| Repeatability | ±0.002 mm |
| Machine Weight | 32,000 kg (70,548 lb) |
| CNC Control | Makino Professional 6 (Fanuc-based) |
| Machine Type | Machining Center |
| Num Of Axes | 3 |
| Operation Type | CNC |
| Cnc Brand | Fanuc Professional 3 |
| Table Size L X W | 24.800(L) x 24.800(W) |
| Max Workpiece Weight | 2,640 |
| Support Index Table | Standard |
| Support Rotary Table | Optional |
| Direction | Horizontal |
| Taper | #50 |
| Taper Opt | HSK100A |
| Top Rpm | 10,000 |
| Hp | 47.00 |
| U Axis | None |
| Tool Carrier | ATC |
| Num Tools | 60 |
| Num Tools Opt | 300 |
| Tool Change Time | 1.70 |
| Tool Change Chip Time | 4.20 |
| Pallet Changer Available | Standard |
| Num Pallets | 2 |
| Num Axes | 3 |
| Num Axes Opt | 4 |
| X1 | 43.300" |
| Y1 | 32.300" |
| Z1 | 40.100" |
| B1 | 360.000° |
Our best estimate for the Makino a82 is $600,000 - $900,000. This is an estimate for a horizontal machining centers (hmc) in this class, not a quote from Makino; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/makino-a82#price; the request is passed to Makino or an authorised dealer.
No, the a82 is not in Makino's current lineup. The figures on this page come from a third-party listing, not from Makino, and several rows contradict each other, so treat them as a starting point when inspecting a used machine.
Both use 630 mm pallets. The a81nx has 900 mm (35.4 in) of X and Y and 1,020 mm (40.2 in) of Z, with a 10,000 rpm CAT50 spindle as standard and 8,000 rpm High Torque optional. The a82's main rows give 900 mm (35.4 in) on all three axes and an 8,000 RPM HSK-A100 spindle with 10,000 RPM optional.
Travels (900 mm on each axis, or 43.3 in, 32.3 in and 40.1 in), tool capacity (80 or 60), tool-to-tool time (2.5 sec, or a second row's 1.70), taper (HSK-A100 or #50), power (37 kW (50 hp) or 47.00 hp) and the control. Check each on the machine itself.
The listing gives two answers: 80, expandable to 160/240, in one row, and 60 with 300 optional in another. The machine you are looking at may have either magazine, so count the pockets before planning a job around tool capacity.
