The Makino EDAF2-FH is an industrial-grade CNC Wire & Sinker EDM powered by the Makino Hyper-i (touchscreen). a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino EDAF2-FH fine hole EDM: 0.1 - 3.0 mm holes, 350 x 250 x 350 mm travels, removable W-axis guide arm, MGH5 30A, 16 position ATC.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Makino Hyper-i (touchscreen) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 500 x 350 mm (19.7 x 13.8 in) |
| Approx. Machine Weight | 4,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 350 mm (13.8 in) |
| Y-Axis Travel | 250 mm (9.8 in) |
| Z-Axis Travel | 350 mm (13.8 in) |
| Table Size | 500 x 350 mm (19.7 x 13.8 in) |
| Max Workpiece Weight | 500 kg (1,100 lb) |
| Max Electrode Weight | 50 kg (110 lb) |
| Tank Internal Dimensions | 650 x 500 x 350 mm (25.6 x 19.7 x 13.8 in) |
| Hole Drilling Range | 0.1 - 3.0 mm (0.004 - 0.118 in) |
| Nc Power Supply | MGH5 (30A peak) |
| Rapid Traverse | 5,000 mm/min (197 ipm) |
| Atc Capacity | 16 positions |
| C Axis Speed | 1,000 RPM (MA Head, optional) |
| Machine Weight | ~4,500 kg (9,921 lb) |
| CNC Control | Makino Hyper-i (touchscreen) |
| Additional Axis | W-axis (removable die guide arm) |
| Metricenglish | X: 350 mm Y: 250 mm Z: 350 mmMaximum Workpiece Weight500 kgTable: 21.7" x 13.8"X: 13.8" Y: 9.8" Z: 13.8"Maximum Workpiece:1,100 lbsMaximum Workpiece Weight:1,100 lbs |
| Maximum Workpiece1100 Lbs | Maximum Workpiece Weight:1,100 lbs |
| Maximum Workpiece | 1,100 lbs |
Our best estimate for the Makino EDAF2-FH is $130,000 - $185,000. This is an estimate for a sinker edm (ram edm) in this class, not a quote from Makino; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/makino-edaf2-fh#price; the request is passed to Makino or an authorised dealer.
The listed hole drilling range is 0.1 - 3.0 mm (0.004 - 0.118 in). The drilling electrode is guided by a die guide arm on the W-axis, and the optional MA head turns it at up to 1,000 RPM.
Yes. The die guide arm on the W-axis is removable, so with it taken off the machine works as a ram EDM with 350 mm (13.8 in) of X, 250 mm (9.8 in) of Y and 350 mm (13.8 in) of Z, a 16 position ATC and electrodes up to 50 kg (110 lb).
The EDAF2-FH adds hole drilling with the W-axis die guide arm and has 350 mm (13.8 in) of Z against 250 mm (9.8 in) on the EDAF2. Its table is 500 x 350 mm (19.7 x 13.8 in) against the EDAF2's 550 × 350 mm (21.65 in x 13.78 in).
The NC power supply is an MGH5 rated at 30A peak, and the control is Makino's Hyper-i touchscreen. Rapid traverse is 5,000 mm/min (197 ipm) and the machine weighs ~4,500 kg (9,921 lb).
