The Makino EDG30 is an industrial-grade CNC Wire & Sinker EDM powered by the Makino Hyper-i. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino EDG30 small sinker EDM, older unverified model: listed 300 x 220 x 250 mm travels, 450 x 350 mm table, 400 kg parts, 72A generator.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Makino Hyper-i |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 450 x 350 mm |
| Approx. Machine Weight | 3,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 450 x 350 mm |
| X-Axis Travel | 300 mm |
| Y-Axis Travel | 220 mm |
| Z-Axis Travel | 250 mm |
| Max Workpiece Weight | 400 kg |
| Max Workpiece Height | 200 mm |
| Generator Power | MGH generator, 72A peak current |
| Surface Finish | Ra 0.1 µm (mirror finish capable) |
| CNC Control | Makino Hyper-i |
| Machine Weight | 3,200 kg |
Our best estimate for the Makino EDG30 is $180,000 - $240,000. This is an estimate for a sinker edm (ram edm) in this class, not a quote from Makino; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/makino-edg30#price; the request is passed to Makino or an authorised dealer.
It is not in Makino's current lineup and may be an older model. The figures on this page could not be matched to a Makino source, so confirm travels, generator and control on the machine itself before relying on them.
On the listed figures they are close in size. The EDGE2i has 300 mm of X, 250 mm of Y and 250 mm of Z over a 500 x 350 mm table; the EDG30 is listed with the same X and Z, 220 mm of Y and a 450 x 350 mm table. The EDGE2i is the one Makino currently offers.
The listed figures give Ra 0.1 µm and describe the machine as mirror finish capable, from an MGH generator with 72A peak current. Finish depends on electrode material, flushing and settings as well as on the generator, so ask for a test cut before relying on it.
The listed limits are 400 kg and 200 mm of workpiece height, on a 450 x 350 mm table with 300 x 220 x 250 mm of travel. No tank size is listed, so measure the tank on the machine if the part is close to those limits.
