The Mazak CV 5-500 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak CV 5-500: listed 5-axis trunnion machine with a 500 mm table, 730 / 510 / 510 mm travels, a 12,000 rpm 40-taper spindle and 30 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Taper Interface | BT40 / CAT40 |
| Table / Platter / Chuck Size | 500 mm diameter trunnion |
| Approx. Machine Weight | 9,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 500 mm diameter trunnion |
| X Y Z Travel | 730 mm / 510 mm / 510 mm |
| A Axis Range | -30° to +120° |
| C Axis Range | 360° continuous |
| Spindle Speed | 12,000 rpm (standard) |
| Spindle Motor | 22 kW (40-taper) |
| Spindle Taper | BT40 / CAT40 |
| Atc Capacity | 30 tools |
| Rapid Traverse | 50 m/min (X/Y/Z) |
| Cnc Control | MAZATROL SmoothG |
| Machine Weight | Approx. 9,000 kg |
| Floor Space | Approx. 2,900 × 3,200 mm |
Our best estimate for the Mazak CV 5-500 is $350,000 - $480,000. This is an estimate for a 5-axis machining centers in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-cv-5-500#price; the request is passed to Yamazaki Mazak or an authorised dealer.
It does not appear on Mazak's current model list, and the table on this page could not be matched to a manufacturer page. Use the listed figures (730 / 510 / 510 mm travels, a 500 mm diameter trunnion table, a 12,000 rpm 40-taper spindle) as a guide, and confirm them from the machine's nameplate and manuals.
The listed A-axis range is -30° to +120°, and the C axis is listed as 360° continuous. No rotary axis speeds or indexing increments are given in the table, so if cycle time depends on fast repositioning between faces, ask for those figures.
A 40-taper spindle in BT40 or CAT40 with 12,000 rpm as the standard speed and a 22 kW motor. The table gives no torque and does not state whether 22 kW is a continuous or a short-time rating, so check the spindle output diagram of the actual machine before planning heavy cuts.
The listed floor space is approximately 2,900 × 3,200 mm and the listed weight is approximately 9,000 kg. Both are given as approximate, and the table does not say whether the floor space includes a chip conveyor or coolant tank, so measure the installation you are looking at.
