The Mazak Dual Turn 200 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 5,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak Dual Turn 200: twin-spindle, twin-turret turning center with 8 in chucks, 5,000 rpm, 11 kW (15 HP) continuous per spindle, 24 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 5,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Approx. Machine Weight | 6,800 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 8 in |
| Max Spindle Speed | 5,000 rpm |
| Spindle Power Intermittent | 15 kW (20 HP) (40% ED) |
| Spindle Motor Power | 11 kW (15 HP) continuous |
| Sub Spindle Chuck Size | 8 in |
| Sub Spindle Speed | 5,000 rpm |
| Sub Spindle Power Intermittent | 15 kW (20 HP) (30 min. rating) |
| Sub Spindle Power | 11 kW (15 HP) continuous |
| Tool Capacity | 24 tools |
| X-Axis Travel | 9 in (229 mm) |
| Z-Axis Travel | 20 in (508 mm) |
| Footprint | 3,420 mm (134.6 in) × 1,795 mm (70.7 in) (W × L, MAZATROL SmoothC) |
| Machine Height | 2,090 mm (82.3 in) |
| Machine Weight | 6,800 lb (3,084 kg) |
Our best estimate for the Mazak Dual Turn 200 is $180,000 - $280,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-dual-turn-200#price; the request is passed to Yamazaki Mazak or an authorised dealer.
Two of each. Mazak describes a symmetrical 2-spindle / 2-turret structure in which both sides have the same machining capacity. Each spindle carries an 8 in chuck, runs to 5,000 rpm and is rated 11 kW (15 HP) continuous. Tool capacity is given as 24 tools.
Mazak's model list gives the configuration of this model as Second Spindle only, and the specification table has no milling spindle or Y-axis rows. On the published information it is a turning machine. If the part needs cross-holes or flats, ask Mazak before assuming the machine can do them.
Each spindle is rated 11 kW (15 HP) continuous. The short-term rating is 15 kW (20 HP) on both spindles. Mazak's table gives it at 40% ED for the main spindle and as a 30 min. rating for the second spindle, so the two short-term figures are not stated on the same basis.
The machine is 3,420 mm (134.6 in) × 1,795 mm (70.7 in) with the MAZATROL SmoothC control, 2,090 mm (82.3 in) high, and weighs 6,800 lb (3,084 kg). Mazak states that this is 30% less floor space than two of its 2-axis CNC turning centers of the same class, before counting the gap between machines and the chip conveyors.
Mazak describes three systems. The basic system has a workpiece unloading device that puts finished parts on a receiving table. A bar feeder can be paired with an unloading hand. The GL-100 gantry loader loads material and unloads finished parts for chuck and shaft workpieces, and Mazak quotes 20.7 sec of loading time inside the machine against 25.1 sec for its previous gantry loader.
