The Mazak INTEGREX e-670H is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Standard CNC. a top spindle speed of 1,600 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak INTEGREX e-670H mill-turn: 123 in (3,124 mm) Z travel, 1,600 rpm turning spindle, 10,000 rpm CAT50 milling spindle, 40 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 1,600 RPM |
| Spindle Motor Rating | 37.0 kW |
| Spindle Taper Interface | CAT50 |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Approx. Machine Weight | 68,342 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bed Length Type | 3000U |
| Max Spindle Speed | 1,600 rpm |
| Spindle Power Intermittent | 45 kW (60 HP) (40% ED) |
| Spindle Motor Power | 37 kW (50 HP) continuous |
| Milling Spindle Speed | 10,000 rpm |
| Milling Spindle Torque Intermittent | 260 Nm (192 ft-lb) (40% ED) |
| Milling Spindle Torque | 191 Nm (141 ft-lb) continuous |
| Milling Spindle Power Intermittent | 37 kW (50 HP) (40% ED) |
| Milling Spindle Power | 30 kW (40 HP) continuous |
| B Axis Indexing Increment | 0.0001° |
| Spindle Taper | CAT50 |
| Tool Capacity | 40 tools |
| Max Tool Diameter | Ø5 in (127 mm) |
| Max Tool Diameter Adjacent Empty | Ø10 in (254 mm) |
| Max Tool Length | 20 in (508 mm) |
| Max Tool Weight | 66 lb (30 kg) |
| X-Axis Travel | 40 in (1,016 mm) |
| Y-Axis Travel | 26 in (660 mm) |
| Z-Axis Travel | 123 in (3,124 mm) |
| W Axis Travel | 113 in (2,870 mm) |
| Rapid Traverse X | 1,575 ipm (40 m/min) |
| Rapid Traverse Y | 1,575 ipm (40 m/min) |
| Rapid Traverse Z | 1,575 ipm (40 m/min) |
| Tailstock Taper | MT No.6 |
| Tailstock Thrust | 6,744 lb (3,059 kg) |
| Footprint | 333 in (8,458 mm) × 201 in (5,105 mm) (W × L) |
| Machine Height | 153 in (3,886 mm) |
| Machine Weight | 68,342 lb (30,999 kg) |
Our best estimate for the Mazak INTEGREX e-670H is $700,000 - $1,100,000. This is an estimate for a mill-turn / multi-tasking machines in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-integrex-e-670h#price; the request is passed to Yamazaki Mazak or an authorised dealer.
Mazak's table for the 3000U bed length gives 123 in (3,124 mm) of Z travel and 113 in (2,870 mm) of W-axis travel. It does not state a maximum turning length or diameter, and the series page only places the model in the 18 to 32 inch chuck group, so the between-centres capacity for a particular chuck and tailstock setup should be confirmed with Mazak.
The turning spindle runs to 1,600 rpm and is rated 37 kW (50 HP) continuous and 45 kW (60 HP) at 40% ED. The CAT50 milling spindle runs to 10,000 rpm, rated 30 kW (40 HP) and 191 Nm (141 ft-lb) continuous, or 37 kW (50 HP) and 260 Nm (192 ft-lb) at 40% ED.
The INTEGREX e-500H has 63 in (1,600 mm) of Z travel, a 3,300 rpm spindle and weighs 49,824 lb (22,600 kg). The INTEGREX e-800H has 172 in (4,369 mm) of Z, a 700 rpm spindle rated 45 kW (60 HP) continuous and weighs 173,280 lb (78,599 kg). The e-670H is the middle step: 123 in (3,124 mm) of Z, 1,600 rpm, 37 kW (50 HP) continuous and 68,342 lb (30,999 kg). All three use a CAT50 milling spindle and a 40-tool magazine.
The magazine holds 40 tools on a CAT50 taper. Maximum diameter is 5 in (127 mm), or 10 in (254 mm) when the adjacent pockets are empty. Maximum length is 20 in (508 mm) and maximum weight 66 lb (30 kg). Longer bars are covered by the long boring bar system Mazak describes for the series, which stores three bars in a dedicated stocker on the e-670H.
The footprint is 333 in (8,458 mm) × 201 in (5,105 mm) (W × L), the height 153 in (3,886 mm) and the weight 68,342 lb (30,999 kg). Plan the foundation, door openings and lifting equipment around those figures. Mazak's table does not list power or air requirements, so ask for the installation drawing before preparing the site.
