The Mazak INTEGREX e-800H is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Standard CNC. a top spindle speed of 700 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak INTEGREX e-800H: 172 in (4,369 mm) Z travel, 700 rpm turning spindle at 45 kW (60 HP) continuous, CAT50 milling spindle, 173,280 lb machine.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 700 RPM |
| Spindle Motor Rating | 45.0 kW |
| Spindle Taper Interface | CAT50 |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Approx. Machine Weight | 173,280 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bed Length Type | 4000U |
| Max Spindle Speed | 700 rpm |
| Spindle Power Intermittent | 45 kW (60 HP) (40% ED) |
| Spindle Motor Power | 45 kW (60 HP) continuous |
| Milling Spindle Speed | 10,000 rpm |
| Milling Spindle Torque Intermittent | 260 Nm (192 ft-lb) (40% ED) |
| Milling Spindle Torque | 191 Nm (141 ft-lb) continuous |
| Milling Spindle Power Intermittent | 37 kW (50 HP) (40% ED) |
| Milling Spindle Power | 30 kW (40 HP) continuous |
| B Axis Indexing Increment | 0.0001° |
| Spindle Taper | CAT50 |
| Tool Capacity | 40 tools |
| Max Tool Diameter | Ø5 in (127 mm) |
| Max Tool Diameter Adjacent Empty | Ø10 in (254 mm) |
| Max Tool Length | 26 in (660 mm) |
| Max Tool Weight | 66 lb (30 kg) |
| X-Axis Travel | 51 in (1,295 mm) |
| Y-Axis Travel | 32 in (813 mm) |
| Z-Axis Travel | 172 in (4,369 mm) |
| Rapid Traverse X | 709 ipm (18 m/min) |
| Rapid Traverse Y | 709 ipm (18 m/min) |
| Rapid Traverse Z | 945 ipm (24 m/min) |
| Tailstock Taper | No.100 Metric center |
| Tailstock Thrust | 16,860 lb (7,648 kg) |
| Footprint | 472 in (11,989 mm) × 236 in (5,994 mm) (W × L) |
| Machine Height | 183 in (4,648 mm) |
| Machine Weight | 173,280 lb (78,599 kg) |
Our best estimate for the Mazak INTEGREX e-800H is $1,000,000 - $1,800,000. This is an estimate for a mill-turn / multi-tasking machines in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-integrex-e-800h#price; the request is passed to Yamazaki Mazak or an authorised dealer.
Size and pace. The e-800H has 172 in (4,369 mm) of Z, 51 in (1,295 mm) of X and 32 in (813 mm) of Y, a 700 rpm spindle and rapids of 709 ipm (18 m/min) in X and Y. The INTEGREX e-670H has 123 in (3,124 mm) of Z, 40 in (1,016 mm) of X and 26 in (660 mm) of Y, a 1,600 rpm spindle and 1,575 ipm (40 m/min) rapids. The INTEGREX e-670H weighs 68,342 lb (30,999 kg), well under half of the 173,280 lb (78,599 kg) of the e-800H.
Maximum spindle speed is 700 rpm. Mazak's table gives the spindle motor as 45 kW (60 HP) continuous and the same 45 kW (60 HP) at 40% ED. The tailstock has a No.100 metric centre and 16,860 lb (7,648 kg) of thrust. No chuck size or maximum turning diameter is given in the table; the series page places the model in the 24 to 50 inch chuck group.
It is a CAT50 spindle with a top speed of 10,000 rpm, rated 30 kW (40 HP) continuous and 37 kW (50 HP) at 40% ED. Torque is 191 Nm (141 ft-lb) continuous and 260 Nm (192 ft-lb) at 40% ED. The B axis indexes in 0.0001° increments, so the spindle can be set to any angle for milling, drilling and boring on a turned part.
Mazak lists a footprint of 472 in (11,989 mm) × 236 in (5,994 mm) (W × L), a height of 183 in (4,648 mm) and a weight of 173,280 lb (78,599 kg). Crane capacity, floor loading and the route into the building should be checked against those numbers before anything else.
Often, yes. The e-800H is built around length between a chuck and a tailstock. The INTEGREX e-1250V/8 is a vertical-table alternative with a maximum turning diameter of 57 in (1,448 mm), a 5,952 lb (2,700 kg) table load and 53 in (1,346 mm) of Z travel. Discs and rings inside those limits are easier to load flat onto a table; long shafts belong on the horizontal machine.
