The Mazak INTEGREX i-250H S is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Standard CNC. a top spindle speed of 5,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak INTEGREX i-250H S: two 8 in chuck, 5,000 rpm turning spindles, 12,000 rpm HSK-A63 milling spindle, 38 tools, Ø26 in (660 mm) turning.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 5,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | HSK-A63 |
| Automatic Tool Changer (ATC) | 38 Tool Stations |
| Approx. Machine Weight | 29,652 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bed Length Type | 1000U |
| Max Turning Diameter | Ø26 in (660 mm) |
| Max Turning Length | 40 in (1,016 mm) |
| Chuck Size | 8 in |
| Max Spindle Speed | 5,000 rpm |
| Spindle Power Intermittent | 22 kW (30 HP) (40% ED) |
| Spindle Motor Power | 15 kW (20 HP) continuous |
| Sub Spindle Chuck Size | 8 in |
| Sub Spindle Speed | 5,000 rpm |
| Sub Spindle Power Intermittent | 18.5 kW (25 HP) (40% ED) |
| Sub Spindle Power | 15 kW (20 HP) continuous |
| Milling Spindle Speed | 12,000 rpm |
| Milling Spindle Torque Intermittent | 124 Nm (91 ft-lb) (40% ED) |
| Milling Spindle Torque | 91.3 Nm (67 ft-lb) continuous |
| Milling Spindle Power Intermittent | 24 kW (32 HP) (40% ED) |
| Milling Spindle Power | 22 kW (30 HP) continuous |
| B Axis Indexing Increment | 0.0001° |
| Spindle Taper | HSK-A63 |
| Tool Capacity | 38 tools |
| Max Tool Diameter | Ø4 in (102 mm) |
| Max Tool Diameter Adjacent Empty | Ø5 in (127 mm) |
| Max Tool Length | 16 in (406 mm) |
| Max Tool Weight | 26 lb (12 kg) |
| X-Axis Travel | 27 in (686 mm) |
| Y-Axis Travel | 12 in (305 mm) |
| Z-Axis Travel | 42 in (1,067 mm) |
| B Axis Range | -30° - +210° |
| Rapid Traverse X | 1,969 ipm (50 m/min) |
| Rapid Traverse Y | 1,575 ipm (40 m/min) |
| Rapid Traverse Z | 1,969 ipm (50 m/min) |
| Footprint | 164 in (4,166 mm) × 106 in (2,692 mm) (W × L) |
| Machine Height | 107 in (2,718 mm) |
| Machine Weight | 29,652 lb (13,450 kg) |
Our best estimate for the Mazak INTEGREX i-250H S is $400,000 - $580,000. This is an estimate for a mill-turn / multi-tasking machines in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-integrex-i-250h-s#price; the request is passed to Yamazaki Mazak or an authorised dealer.
A second spindle; Mazak's model list gives the configuration of the INTEGREX i-250H S as Second Spindle. It has an 8 in chuck, runs to 5,000 rpm and is rated 15 kW (20 HP) continuous and 18.5 kW (25 HP) at 40% ED. The machine weighs 29,652 lb (13,450 kg), where the INTEGREX i-250H weighs 28,990 lb (13,150 kg).
On the continuous rating, yes: 15 kW (20 HP) each. At 40% ED the main spindle is rated 22 kW (30 HP) and the second spindle 18.5 kW (25 HP). Chuck size is 8 in and maximum speed 5,000 rpm on both, so the heavier interrupted roughing belongs on the main spindle.
Mazak's table for this version lists no tailstock taper or tailstock thrust. The second spindle takes that end of the machine. If your parts are long relative to their diameter and need support at the free end while turning, raise it with Mazak before ordering.
X travel is 27 in (686 mm), Y is 12 in (305 mm) and Z is 42 in (1,067 mm). Rapid traverse is 1,969 ipm (50 m/min) in X and Z and 1,575 ipm (40 m/min) in Y. The B-axis range is -30° to +210° with a 0.0001° indexing increment.
The footprint is 164 in (4,166 mm) × 106 in (2,692 mm) (W × L), the height is 107 in (2,718 mm) and the weight is 29,652 lb (13,450 kg). Mazak describes the front of INTEGREX i-H machines as flat so that automation such as articulated robots and stockers can be linked to it.
