The Mazak INTEGREX i-450 NEO is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Standard CNC. a top spindle speed of 3,300 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak INTEGREX i-450 NEO: 12 in chuck, 3,300 rpm, 30 kW (40 HP) continuous turning spindle, Ø26 in (660 mm) x 40 in (1,016 mm), 36 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,300 RPM |
| Spindle Motor Rating | 30.0 kW |
| Spindle Taper Interface | HSK-T63, HSK-A63 |
| Automatic Tool Changer (ATC) | 36 Tool Stations |
| Approx. Machine Weight | 30,313 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bed Length Type | 1000U |
| Max Turning Diameter | Ø26 in (660 mm) |
| Max Turning Length | 40 in (1,016 mm) |
| Chuck Size | 12 in |
| Max Spindle Speed | 3,300 rpm |
| Spindle Power Intermittent | 37 kW (50 HP) (40% ED) |
| Spindle Motor Power | 30 kW (40 HP) continuous |
| Milling Spindle Speed | 12,000 rpm |
| Milling Spindle Torque Intermittent | 124 Nm (91 ft-lb) (40% ED) |
| Milling Spindle Torque | 91.3 Nm (67 ft-lb) continuous |
| Milling Spindle Power Intermittent | 24 kW (32 HP) (40% ED) |
| Milling Spindle Power | 22 kW (30 HP) continuous |
| B Axis Indexing Increment | 0.0001° |
| Spindle Taper | HSK-T63, HSK-A63 |
| Tool Capacity | 36 tools |
| Max Tool Diameter | Ø4 in (102 mm) |
| Max Tool Diameter Adjacent Empty | Ø5 in (127 mm) |
| Max Tool Length | 16 in (406 mm) |
| Max Tool Weight | 26 lb (12 kg) |
| X-Axis Travel | 27 in (686 mm) |
| Y-Axis Travel | 12 in (305 mm) |
| Z-Axis Travel | 42 in (1,067 mm) |
| B Axis Range | -30° - +210° |
| Rapid Traverse X | 1,969 ipm (50 m/min) |
| Rapid Traverse Y | 1,575 ipm (40 m/min) |
| Rapid Traverse Z | 1,969 ipm (50 m/min) |
| Tailstock Taper | MT No.5 |
| Tailstock Thrust | 2,248 lb (1,020 kg) |
| Footprint | 164 in (4,166 mm) × 123 in (3,124 mm) (W × L) |
| Machine Height | 107 in (2,718 mm) |
| Machine Weight | 30,313 lb (13,750 kg) |
The price estimate for the Mazak INTEGREX i-450 NEO is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-integrex-i-450-neo#price; the request is passed to Yamazaki Mazak or an authorised dealer.
The main spindle is rated 30 kW (40 HP) continuous and 37 kW (50 HP) at 40% ED, with a maximum speed of 3,300 rpm and a 12 in chuck. By comparison the milling spindle is rated 22 kW (30 HP) continuous and 24 kW (32 HP) at 40% ED.
The table pairs the 12 in chuck with a 3,300 rpm maximum. A larger chuck and a higher-power spindle are normally run slower than a small one. If your work is mostly small diameters that need speed, the INTEGREX i-250 NEO has an 8 in chuck and 5,000 rpm on the same travels, with 15 kW (20 HP) continuous.
No. Maximum turning diameter is Ø26 in (660 mm) and maximum turning length 40 in (1,016 mm), and travels are 27 in (686 mm) in X, 12 in (305 mm) in Y and 42 in (1,067 mm) in Z. The INTEGREX i-250 NEO is listed with the same capacity and travels. Weight differs: 30,313 lb (13,750 kg) here.
A tailstock with an MT No.5 taper and 2,248 lb (1,020 kg) of thrust. On a 40 in (1,016 mm) maximum turning length that supports shaft work between the 12 in chuck and the centre. No second spindle appears in this model's table.
The milling spindle reaches 12,000 rpm, with 91.3 Nm (67 ft-lb) of continuous torque and 124 Nm (91 ft-lb) at 40% ED. The taper is listed as HSK-T63, HSK-A63. The magazine holds 36 tools up to Ø4 in (102 mm), or Ø5 in (127 mm) with adjacent pockets empty, 16 in (406 mm) long and 26 lb (12 kg).
