The Mazak QRX-50MSY SG is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak QRX-50MSY SG: milling, second spindle and Y-axis on a two-turret lathe. 6 in chucks, 6,000 rpm, 15 kW (20 HP) (40% ED) spindles.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 17,637 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 6 in |
| Max Spindle Speed | 6,000 rpm |
| Spindle Power Intermittent | 15 kW (20 HP) (40% ED) |
| Spindle Motor Power | 11 kW (15 HP) continuous |
| Sub Spindle Chuck Size | 6 in |
| Sub Spindle Speed | 6,000 rpm |
| Sub Spindle Power Intermittent | 15 kW (20 HP) (40% ED) |
| Sub Spindle Power | 11 kW (15 HP) continuous |
| Turrets Tool Storage Capacity | 12 |
| Milling Spindle Speed | 6,000 rpm |
| Rotary Tool Spindle Spindle Motor Short Time Rating | 5.3 kW (7 HP) (short time rating) |
| Milling Spindle Power | 1.8 kW (2 HP) continuous |
| Rapid Traverse X | 1,181 ipm (30 m/min) |
| Rapid Traverse Y | 709 ipm (18 m/min) |
| Rapid Traverse Z | 1,575 ipm (40 m/min) |
| Machine Weight | 17,637 lb (8,000 kg) |
Our best estimate for the Mazak QRX-50MSY SG is $360,000 - $460,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-qrx-50msy-sg#price; the request is passed to Yamazaki Mazak or an authorised dealer.
Yes. Mazak describes the QRX series as using upper and lower turrets together to reduce cycle time, and says the two-turret, two-spindle construction of the QRX-50MS SG and QRX-50MSY SG allows simultaneous left and right hand machining. Balance cutting and simultaneous machining are programmed with the conversational MAZATROL program.
Mazak lists several functions for it. The display is split into two columns so each turret's operation can be followed, and the EIA/ISO programming screen shows waiting command positions side by side. Inter-grid single block operation stops all turrets when one completes a process. Override is applied to standby time as well as operating time, which keeps the turrets synchronised, and the program can be run at any speed by turning the handwheel. Safety Shield checks a 3D model for interference during manual axis moves.
The rotary tool spindle runs to 6,000 rpm. Its motor is rated 1.8 kW (2 HP) continuous with a short-time rating of 5.3 kW (7 HP). Y-axis rapid traverse is 709 ipm (18 m/min). Those figures suit drilling, tapping and light milling on turned parts; the two turning spindles, at 11 kW (15 HP) continuous each, do the heavy cutting.
Two optional systems are described for the series. A workpiece unloader, offered for the QRX-50MS SG and QRX-50MSY SG as a hand type or a bucket type, takes the finished part from the second spindle while the main spindle is machining. The auto parts catcher uses a bucket attached to the lower turret to carry finished parts from either spindle, and bar remnants, out of the work area.
Mazak lists the QRX-50 SG and QRX-50MY SG as tailstock-specification machines for mass production of shaft shapes. The QRX-50 has an 8 in chuck, a 6,000 rpm spindle rated 11 kW (15 HP) continuous and weighs 16,534 lb (7,500 kg), against 17,637 lb (8,000 kg) for the QRX-50MSY SG.
