The Mazak QTE-200MSY is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 5,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak QTE-200MSY: 8 in chuck lathe with milling, Y-axis and a 6 in second spindle. 5,000 rpm, 11 kW continuous, 24 in (610 mm) of Z travel.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 5,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bed Length Type | 500U |
| Max Swing | Ø27 in (686 mm) |
| Max Turning Diameter | Ø13 in (330 mm) |
| Max Bar Capacity | Ø2 in (51 mm) |
| Chuck Size | 8 in |
| Max Spindle Speed | 5,000 rpm |
| Spindle Max Torque | 123 ft-lb (167 Nm) |
| Spindle Power Intermittent | 15 kW (40% ED) |
| Spindle Motor Power | 11 kW (15 HP) continuous |
| Sub Spindle Chuck Size | 6 in |
| Sub Spindle Speed | 6,000 rpm |
| Sub Spindle Power Intermittent | 7.5 kW (40% ED) |
| Sub Spindle Power | 5.5 kW continuous |
| Tool Capacity | 12 tools |
| Milling Spindle Speed | 4,500 rpm |
| Rotary Tool Spindle Max Torque | 34 ft-lb (46 Nm) |
| Rotary Tool Spindle Spindle Motor 40 Pct Ed | 5.5 kW (40% ED) |
| Milling Spindle Power | 3.7 kW continuous |
| X-Axis Travel | 9 in (229 mm) |
| Z-Axis Travel | 24 in (610 mm) |
| W Axis Travel | 23 in (584 mm) |
| Rapid Traverse X | 1,181 ipm (30 m/min) |
| Rapid Traverse Y | 394 ipm (10 m/min) |
| Rapid Traverse Z | 1,181 ipm (30 m/min) |
Our best estimate for the Mazak QTE-200MSY is $130,000 - $180,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-qte-200msy#price; the request is passed to Yamazaki Mazak or an authorised dealer.
Mazak's model list gives the configuration of the QTE-200MSY as Milling, Second Spindle, Y-axis. The table shows each one: rotary tools at up to 4,500 rpm, a second spindle with a 6 in chuck at up to 6,000 rpm, and a Y-axis with a rapid traverse of 394 ipm (10 m/min).
It is rated 11 kW (15 HP) continuous and 15 kW (40% ED), with a maximum torque of 123 ft-lb (167 Nm) and a top speed of 5,000 rpm. Mazak describes the series spindle as a built-in motor design meant to give high torque in the low-speed range. When setting it against another machine, compare continuous rating with continuous rating.
It has a 6 in chuck, runs to 6,000 rpm and is rated 5.5 kW continuous or 7.5 kW (40% ED). W-axis travel of 23 in (584 mm) lets it reach the part held in the main chuck. With half the main spindle's 11 kW continuous rating, it suits finishing, drilling and light milling on the back face.
Rotary tools run to 4,500 rpm on 3.7 kW continuous, 5.5 kW (40% ED), with a maximum torque of 34 ft-lb (46 Nm). That is drilling, tapping and small end mill work. The Y-axis adds off-centre features and moves at 394 ipm (10 m/min) in rapid; the table lists its travel as 3.9 with no unit shown, so ask Mazak for the stroke if a feature sits near the limit.
Maximum turning diameter is Ø13 in (330 mm) under a swing of Ø27 in (686 mm), with 24 in (610 mm) of Z travel and 9 in (229 mm) of X. Bar capacity through the main spindle is Ø2 in (51 mm). The main chuck is 8 in and the second spindle's is 6 in, so the grip diameter after transfer is the tighter limit.
