The Mazak QUICK TURN 250MY is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak QUICK TURN 250MY: 10 in chuck lathe with milling and Y-axis, 40 in (1,016 mm) turning length, Ø15 in (381 mm) diameter, 4,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bed Length Type | 20 in (508 mm) |
| Max Swing | Ø27 in (686 mm) |
| Max Turning Diameter | Ø15 in (381 mm) |
| Max Turning Length | 40 in (1,016 mm) |
| Max Bar Capacity | Ø3 in (76 mm) |
| Chuck Size | 10 in |
| Max Spindle Speed | 4,000 rpm |
| Spindle Power Intermittent | 26 kW (35 HP) (30 min. rating) |
| Tool Capacity | 12 tools |
| X-Axis Travel | 9 in (229 mm) |
| Y-Axis Travel | 4 in (102 mm) |
| Z-Axis Travel | 43 in (1,092 mm) |
| W Axis Travel | 42 in (1,067 mm) |
Our best estimate for the Mazak QUICK TURN 250MY is $135,000 - $200,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-quick-turn-250my#price; the request is passed to Yamazaki Mazak or an authorised dealer.
Mazak lists a maximum turning length of 40 in (1,016 mm) with 43 in (1,092 mm) of Z travel. Maximum turning diameter is Ø15 in (381 mm) and the swing is Ø27 in (686 mm). The same table gives the bed-length class as 20 in (508 mm), which does not match the turning length, so confirm the bed with Mazak before relying on either figure.
The model's table has no tailstock row. It lists a W-axis travel of 42 in (1,067 mm), and for the series Mazak describes an NC tailstock with ball screw and servo motor drive whose thrust is set in 0.1 kN increments, in dead-center or built-in-center type. Have the tailstock type and any steady rest stated in the quotation.
The Quick Turn 250M shares the 10 in chuck, the 4,000 rpm spindle and the Ø15 in (381 mm) turning diameter, with a turning length of 20 in (508 mm) and 22 in (559 mm) of Z travel. The 250MY described here turns twice that length and adds 4 in (102 mm) of Y travel for off-centre milling.
Y travel is 4 in (102 mm). With live tools in the turret that is what lets the machine cut a keyway with parallel walls, drill a hole off the centreline or mill a flat at a set distance from centre. Features that sit further off centre than the stroke allows are outside the machine.
A 10 in chuck spindle with a 4,000 rpm maximum, rated 26 kW (35 HP) on a 30 min. rating, with Ø3 in (76 mm) of bar capacity. Mazak states that every model of the series has a built-in motor spindle, which has no gears or belts.
