The Mazak Quick Turn 450MY is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 2,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak Quick Turn 450MY: 18 in chuck, 80 in (2,032 mm) turning length, Ø24 in (610 mm) diameter, 8 in (203 mm) Y-axis, 2,000 rpm, 37 kW (50 HP) (30 min. rating).
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 2,000 RPM |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bed Length Type | 80 in (2,032 mm) |
| Max Swing | Ø33 in (838 mm) |
| Max Turning Diameter | Ø24 in (610 mm) |
| Max Turning Length | 80 in (2,032 mm) |
| Max Bar Capacity | Ø7 in (178 mm) |
| Chuck Size | 18 in |
| Max Spindle Speed | 2,000 rpm |
| Spindle Power Intermittent | 37 kW (50 HP) (30 min. rating) |
| Tool Capacity | 12 tools |
| X-Axis Travel | 13 in (330 mm) |
| Y-Axis Travel | 8 in (203 mm) |
| Z-Axis Travel | 84 in (2,134 mm) |
Our best estimate for the Mazak Quick Turn 450MY is $200,000 - $320,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-qt-450my#price; the request is passed to Yamazaki Mazak or an authorised dealer.
Maximum turning length is 80 in (2,032 mm) and maximum turning diameter is Ø24 in (610 mm), under a Ø33 in (838 mm) swing. Z travel is 84 in (2,134 mm) and Mazak gives the bed-length class as 80 in (2,032 mm). Bar capacity is Ø7 in (178 mm).
The table lists 2,000 rpm for the 18 in chuck spindle, the same figure as on the QUICK TURN 450M. A large chuck and a Ø7 in (178 mm) bar capacity go with a low top speed. For work near the Ø24 in (610 mm) limit that is no handicap; for small diameters it restricts cutting speed, so check the smallest diameter you intend to finish.
The table lists an 18 in chuck. On Mazak's series page the model sits in the 18 / 21 inch chuck group, which carries a 37 kW (50 HP) spindle, a Ø50 boring bar shank and a 32 mm turning tool shank. If a 21 inch chuck is wanted, raise it at the quotation stage.
The QUICK TURN 450M has the same 18 in chuck, 2,000 rpm, Ø33 in (838 mm) swing and 12 tools, with 42 in (1,067 mm) of Z travel, Ø23 in (584 mm) of turning diameter and 14 in (356 mm) of X. The 450MY covered here has 84 in (2,134 mm) of Z and adds a Y-axis with 8 in (203 mm) of travel.
The model's table does not list either. For the series Mazak describes an NC tailstock whose thrust is set in 0.1 kN increments, in dead-center type for light-duty work or built-in-center type for heavy-duty cutting, together with a steady rest. On an 80 in (2,032 mm) machine both should be specified in the quotation.
