The Mazak Super Turbo-X510 is an industrial-grade Fiber Laser Cutting Machines powered by the MAZATROL Laser (CO2 variant). a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak Super Turbo-X510 CO2 laser: listed 5,000 W resonator, 5100 x 2500 mm working area, 25 mm mild steel. Older model, figures unverified.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | Fiber Laser Cutting Machines |
| CNC Controller System | MAZATROL Laser (CO2 variant) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Working Area | 5100 x 2500 mm |
| Laser Type | CO2 |
| Laser Power | 5,000 W (5 kW) |
| Max Sheet Thickness Mild Steel | 25 mm |
| Max Sheet Thickness Stainless | 19 mm |
| Max Sheet Thickness Aluminum | 13 mm |
| Max Sheet Thickness Non Metallic | varies by material |
| Positioning Accuracy | ±0.05 mm |
| Repeatability | ±0.03 mm |
| Max Axis Speed | 120 m/min (rapid) |
| Max Sheet Weight | 2,000 kg (estimated for full jumbo format) |
| CNC Control | MAZATROL Laser (CO2 variant) |
| Resonator Gas | CO2/N2/He mixture (sealed or flowing) |
Our best estimate for the Mazak Super Turbo-X510 is $150,000 - $400,000 (used market). This is an estimate for a cnc laser cutting machines in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-super-turbo-x510#price; the request is passed to Yamazaki Mazak or an authorised dealer.
A CO2 laser. The table lists a Mazak axial-flow CO2 resonator of 5,000 W (5 kW), running on a CO2/N2/He gas mixture that is listed as sealed or flowing. The control is listed as MAZATROL Laser in its CO2 variant.
The listed maximums are 25 mm in mild steel, 19 mm in stainless and 13 mm in aluminum. For non-metallic materials the table says only that thickness varies by material, and it has no rows for copper or brass.
The listed working area is 5100 x 2500 mm. Maximum sheet weight is shown as 2,000 kg, but the table marks that as an estimate for the full format, so get the rated table load from the machine's documentation.
No. It is not in Mazak's current lineup and is probably an older model. The figures on this page could not be matched to a Mazak source and should be confirmed on any machine being considered.
