The Mazak SVC is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 15,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak SVC series: traveling-column VMCs with an X-axis linear motor, X travel 120 in (3,048 mm) to 200 in (5,080 mm), 15,000 rpm CAT No.40.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 15,000 RPM |
| Spindle Taper Interface | CAT No.40 |
| Max Table Load Capacity | 5,291 kg |
| Approx. Machine Weight | 28,660 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Models In Series | 2 models: SVC-2000L/120, SVC-2000L/200 |
| Max Table Load | 5,291 lb (2,400 kg) to 7,496 lb (3,400 kg) |
| Spindle Taper | CAT No.40 |
| Max Spindle Speed | 15,000 rpm |
| Spindle Max Torque 0 | 52 ft-lb (71 Nm) |
| Max Tool Diameter | Ø3.15 in (80 mm) |
| Max Tool Diameter Adjacent Empty | Ø4.33 in (110 mm) |
| Max Tool Length | 13.78 in (350 mm) |
| Max Tool Weight | 18 lb (8 kg) |
| X-Axis Travel | 120 in (3,048 mm) to 200 in (5,080 mm) |
| Y-Axis Travel | 20.08 in (510 mm) |
| Z-Axis Travel | 20.08 in (510 mm) |
| Rapid Traverse X | 4,724 ipm (120 m/min) |
| Rapid Traverse Y | 1,969 ipm (50 m/min) |
| Rapid Traverse Z | 1,969 ipm (50 m/min) |
| Machine Height | 102.36 in (2,600 mm) to 112.99 in (2,870 mm) |
| Machine Weight | 28,660 lb (13,000 kg) to 57,320 lb (26,000 kg) |
Our best estimate for the Mazak SVC is $100,000 - $145,000. This is an estimate for a vertical machining centers (vmc) in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-svc#price; the request is passed to Yamazaki Mazak or an authorised dealer.
Mazak lists two, both named in the specification table, with model codes ending in /120 and /200. Across them X travel runs from 120 in (3,048 mm) to 200 in (5,080 mm). Y and Z travel are 20.08 in (510 mm) on both, and both share the CAT No.40 15,000 rpm spindle, the 4,724 ipm (120 m/min) X rapid and the same tool size limits.
Speed over a long stroke. Mazak gives an X rapid traverse of 4,724 ipm (120 m/min) and a cutting feed of 1,181 IPM, against 1,969 ipm (50 m/min) rapids in Y and Z. On a long workpiece or a line of fixtures the spindle spends much of its idle time travelling in X, and Mazak points to reduced positioning time for exactly those jobs.
The table lists a CAT No.40 taper, 15,000 rpm and a maximum torque of 52 ft-lb (71 Nm). Mazak's series page gives the standard spindle's output as 22 kW (30 HP) and describes it as intended for high-speed machining of non-ferrous materials. A 25,000 rpm HSK-A63 spindle is available as an option.
The VTC-800/30SR has 118 in (2,997 mm) of X travel with 32 in (813 mm) of Y and 28 in (711 mm) of Z, an 18,000 rpm CAT No.40 spindle, 30 tools and 1,968 ipm (50 m/min) rapids on all three axes. The SVC series gives up Y and Z, at 20.08 in (510 mm) each, for a longer and much faster X: 120 in (3,048 mm) to 200 in (5,080 mm) at 4,724 ipm (120 m/min).
Weight and height vary widely between the two models. The series runs from 28,660 lb (13,000 kg) to 57,320 lb (26,000 kg) and from 102.36 in (2,600 mm) to 112.99 in (2,870 mm) high, with table loads from 5,291 lb (2,400 kg) to 7,496 lb (3,400 kg). Take the exact figures from the table of the model being ordered before sizing the foundation, the crane and the door opening.
Mazak equips the series with the MAZATROL SmoothG CNC, which has a touch screen and a panel that tilts to suit the operator. MAZATROL conversational programming builds a program from answers to on-screen questions about the drawing. Mazak also describes slider switches for adjusting cycle time, surface finish and machined shape, and a pocket-milling function that holds a constant cutter engagement angle.
