The Mazak SYNCREX is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 8,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak SYNCREX Swiss-type lathes: 20 models in six sizes, main and sub spindle, spindles from 8,000 rpm to 15,000 rpm, 24 to 39 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 8,000 RPM |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Models In Series | 20 models: SYNCREX 10/7, SYNCREX 10/8, SYNCREX 12/7, SYNCREX 12/8, SYNCREX 20/7, SYNCREX 20/8, SYNCREX 20/9, SYNCREX 25/7, SYNCREX 25/8, SYNCREX 25/9, SYNCREX 32/7, SYNCREX 32/8, SYNCREX 32/9, SYNCREX 38/7 and 6 more |
| Max Spindle Speed | 8,000 rpm to 15,000 rpm |
| Spindle Power Intermittent | 3.7 kW (5 HP) (40% ED) to 7.5 kW (10 HP) (40% ED) |
| Sub Spindle Speed | 8,000 rpm to 12,000 rpm |
| Sub Spindle Power Intermittent | 3.7 kW (5 HP) (40% ED) to 7.5 kW (10 HP) (40% ED) |
| Tool Capacity | 24 tools to 39 tools |
| Turret Od | 7 to 11 |
| Turret Cross Live Tool | 4 |
| Turret Back Working | 3 to 8 |
| Turret End Working Tools | 2 to 5 |
Our best estimate for the Mazak SYNCREX is $200,000 - $350,000. This is an estimate for a swiss-type lathes in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-syncrex#price; the request is passed to Yamazaki Mazak or an authorised dealer.
Twenty. In sizes 10 and 12 there are /7 and /8 models: SYNCREX 10/7, 10/8, 12/7 and 12/8. Sizes 20, 25, 32 and 38 each come as /7, /8, /9 and /9X, for example SYNCREX 20/7, 20/8, 20/9 and 20/9X, and the same four in 25, 32 and 38.
There are six size classes, and bar capacity and turning length are given on each model's own table. The SYNCREX 12/8 turns Ø12 mm bar over 135 mm. The SYNCREX 20/7 turns Ø0.75 in (19 mm) bar over 8.07 in (205 mm), and the SYNCREX 20/8, SYNCREX 20/9 and SYNCREX 20/9X list the same two figures. Mazak states that the machines run full bar capacity with no special bar end prep.
Tooling. In the 20 size the bar capacity, 8.07 in (205 mm) turning length and 10,000 rpm spindle stay the same while the SYNCREX 20/7 lists 29 tools, the SYNCREX 20/8 33 tools and the SYNCREX 20/9 36 tools. Across the series the rows that move are OD tools (7 to 11), back-working tools (3 to 8) and end-working tools (2 to 5).
Main spindle speed runs from 8,000 rpm to 15,000 rpm and sub spindle speed from 8,000 rpm to 12,000 rpm, with motors rated between 3.7 kW (5 HP) (40% ED) and 7.5 kW (10 HP) (40% ED). For axis speed, the SYNCREX 20/7 lists a rapid traverse of 1,378 ipm (35 m/min) on X, Y and Z, and the SYNCREX 12/8 lists 35000 mm/min.
Mazak calls it the HDCC base: a solid one-piece casting that it describes as 10% more rigid than cast iron, with 80% less vibration at the cutting point, 30% longer tool life and less thermal distortion. These are Mazak's own claims for the series, not figures from the spec table.
It depends on the size class. The SYNCREX 12/8 is listed at 3197 kg. The SYNCREX 20/7, SYNCREX 20/8, SYNCREX 20/9 and SYNCREX 20/9X are each listed at 7,850 lb (3,561 kg), so within the 20 size the configuration does not change the weight. For the 25, 32 and 38 sizes, take the weight from the model's own table before planning the floor.
