The Mazak SYNCREX 25/7 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak SYNCREX 25/7 Swiss-type lathe: Ø1 in (25 mm) bar, 5.5 kW (8 HP) (40% ED) main and sub spindles at 10,000 rpm, 29 tools with 11 OD positions.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 29 Tool Stations |
| Approx. Machine Weight | 7,850 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | Ø1 in (25 mm) |
| Max Turning Length | 8.07 in (205 mm) |
| Max Spindle Speed | 10,000 rpm |
| Spindle Power Intermittent | 5.5 kW (8 HP) (40% ED) |
| Sub Spindle Speed | 10,000 rpm |
| Sub Spindle Power Intermittent | 5.5 kW (8 HP) (40% ED) |
| Tool Capacity | 29 tools |
| Turret Od | 11 |
| Turret Cross Live Tool | 4 |
| Turret Back Working | 4 |
| Turret End Working Tools | 2 |
| Turret Boring Bar Holder Main Sub | 4 / 4 |
| Rapid Traverse X | 1,378 ipm (35 m/min) |
| Rapid Traverse Y | 1,378 ipm (35 m/min) |
| Rapid Traverse Z | 1,378 ipm (35 m/min) |
| Rapid Traverse X2 Axis | 1,378 ipm (35 m/min) |
| Rapid Traverse Y2 Axis | 1,378 ipm (35 m/min) |
| Rapid Traverse Z2 Axis | 1,378 ipm (35 m/min) |
| Footprint | 48.23 in (1,225 mm) × 88.58 in (2,250 mm) (W × D, MAZATROL SmoothSt) |
| Machine Height | 66.93 in (1,700 mm) |
| Machine Weight | 7,850 lb (3,561 kg) |
Our best estimate for the Mazak SYNCREX 25/7 is $200,000 - $310,000. This is an estimate for a swiss-type lathes in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-syncrex-25-7#price; the request is passed to Yamazaki Mazak or an authorised dealer.
Mazak lists 11 OD tools, 4 cross live tools, 2 end working tools and 4 back working tools. Boring bar holders are listed 4 / 4 for main and sub. Most of the positions therefore serve the main spindle, and the sub spindle has 4 back working tools plus its boring bar holders.
It depends on the stock. The SYNCREX 32/7 takes Ø1.25 in (32 mm) bar and turns 12.59 in (320 mm), but its spindle speed is 8,000 rpm, it lists 27 tools and it weighs 12,200 lb (5,534 kg). This model stops at Ø1 in (25 mm) and 8.07 in (205 mm), runs to 10,000 rpm and weighs 7,850 lb (3,561 kg).
Main and sub spindle are each listed at 5.5 kW (8 HP) at 40% ED, and both reach 10,000 rpm. The table shows no continuous rating, so for long cuts in tough material ask Mazak for the continuous figure.
More tool positions on the same bar size. The SYNCREX 25/8 lists 33 tools and the SYNCREX 25/9 lists 36 tools, against 29 here. All three take Ø1 in (25 mm) bar, turn 8.07 in (205 mm), run to 10,000 rpm and weigh 7,850 lb (3,561 kg).
48.23 in (1,225 mm) of width and 88.58 in (2,250 mm) of depth with the MAZATROL SmoothSt control, and 66.93 in (1,700 mm) of height. Weight is 7,850 lb (3,561 kg). The row does not mention a bar feeder, so add its length when laying out the cell.
