The Mazak Turning Center is an industrial-grade CNC Lathes & Turning Centers powered by the MAZATROL SmoothG. It offers working travels of 310 x x 2100 mm, a top spindle speed of 2,200 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak Turning Center M-5 series: 6 to 2200 rpm spindle with a 3 speed gear shift, Ø4.09" or optional Ø7.13" bore, 14 permanently set tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | MAZATROL SmoothG |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 310 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 2,100 mm |
| Maximum Spindle Speed | 2,200 RPM |
| Spindle Motor Rating | 30.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 14 Tool Stations |
| Approx. Machine Weight | 10,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 12″ |
| Max Workpiece Diameter | 580 mm (22.83 in) |
| Max Turning Length | 2,080 mm / 3,100 mm (81.89 in / 122.05 in) |
| Max Spindle Speed | 2,200 RPM |
| Spindle Speed Min | 6 RPM |
| Spindle Bore | 104 mm (4.09 in) standard, 181 mm (7.13 in) optional |
| Tool Capacity | 14-tool dual turret |
| Front Turret Clamping | 44,600 N (4,550 kgf) |
| Rear Turret Clamping | 40,200 N (4,100 kgf) |
| Tailstock Thrust | 14,700 N (1,500 kgf) |
| Tailstock Bed Clamping | 78,400 N (8,000 kgf) |
| Tailstock Quill Diameter | 100 mm (3.94 in) |
| Spindle Motor Power | 30 kW (40 hp) |
| X Axis Travel | 310 mm (12.2 in) |
| Z Axis Travel | 2,100 mm - 3,150 mm (82.7 in - 124 in) |
| Machine Weight | 10,500 kg (23,149 lb) |
| CNC Control | MAZATROL SmoothG |
| Max Machining Diameter | Φ22.83″ |
| Max Machining Length | 81.89″ / 122.05″ |
Our best estimate for the Mazak Turning Center is $200,000 - $380,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-turning-center#price; the request is passed to Yamazaki Mazak or an authorised dealer.
Mazak lists one model. The model table for the TURNING CENTER M-5 is for the 2000U bed and gives a maximum turning diameter of Ø23 in (584 mm), a maximum turning length of 76 in (1,930 mm), a 15 in chuck and a Ø181 mm (7.1 in) spindle bore at 1,000 rpm.
Mazak describes a Ø4.09" spindle bore, supported by precision bearings, and a Ø7.13" bore as an option for large-diameter workpieces held inside the spindle. The series speed range is quoted as 6 to 2200 rpm with full power from 178 rpm. The TURNING CENTER M-5 model table, which is for a Ø181 mm (7.1 in) bore, lists 1,000 rpm.
Mazak describes 14 permanently set tools, intended to keep setup time down. The front octagonal disc turret uses a 9.92" coupling with a clamping force of 44,600 N (4,550 kgf), and the listed figures give 40,200 N (4,100 kgf) for the rear turret. Large couplings and high clamping force are what Mazak relies on for heavy cutting.
A tailstock with a 3.94" diameter quill and a wide base. Mazak gives its maximum thrust as 14,700 N (1,500 kgf) and its bed clamping force as 78,400 N (8,000 kgf), figures aimed at holding a heavy shaft steady under a deep cut.
