The Mazak TURNING CENTER M-5 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 1,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak TURNING CENTER M-5: Ø181 mm (7.1 in) spindle bore, 15 in chuck, Ø23 in (584 mm) × 76 in (1,930 mm) turning, 1,000 rpm, 22 kW (30 HP) at 40% ED.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 1,000 RPM |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 14,771 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bed Length Type | 2000U |
| Max Swing | Ø24 in (610 mm) |
| Max Turning Diameter | Ø23 in (584 mm) |
| Swing Over Carriage | Ø13 in (330 mm) |
| Max Turning Length | 76 in (1,930 mm) |
| Distance From Spindle Face To Turret Face | 5 in (127 mm) to 86 in (2,184 mm) |
| Max Weight Capacity Chuck Work | 9,480 lb (4,300 kg) |
| Max Bar Capacity | Ø7 in (178 mm) |
| Chuck Size | 15 in |
| Max Spindle Speed | 1,000 rpm |
| Spindle Torque Intermittent | 1,179 ft-lb (1,599 Nm) (40% ED) |
| Spindle Power Intermittent | 22 kW (30 HP) (40% ED) |
| Spindle Bore | Ø181 mm (7.1 in) |
| X-Axis Travel | 22 in (559 mm) |
| Z-Axis Travel | 81 in (2,057 mm) |
| Rapid Traverse X | 472 ipm (12 m/min) |
| Rapid Traverse Z | 551 ipm (14 m/min) |
| Tailstock Travel | 4 in (102 mm) |
| Tailstock Stroke | 5 in (127 mm) |
| Tailstock Taper | MT No.5 |
| Footprint | 200 in (5,080 mm) × 102 in (2,591 mm) (W × L, MAZATROL SmoothC) |
| Machine Height | 81 in (2,057 mm) |
| Machine Weight | 14,771 lb (6,700 kg) |
Our best estimate for the Mazak TURNING CENTER M-5 is $200,000 - $380,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-turning-center-m-5#price; the request is passed to Yamazaki Mazak or an authorised dealer.
Maximum turning diameter is Ø23 in (584 mm) and maximum turning length is 76 in (1,930 mm) on the 2000U bed. Maximum swing is Ø24 in (610 mm) and swing over the carriage is Ø13 in (330 mm). The chuck is a 15 in size, bar capacity is Ø7 in (178 mm), and chuck work can weigh up to 9,480 lb (4,300 kg).
The table gives 22 kW (30 HP) and 1,179 ft-lb (1,599 Nm), both at a 40% ED rating, with a top speed of 1,000 rpm. These are intermittent ratings. The table has no continuous power figure, so ask Mazak for it before comparing this machine with one rated continuously.
The 6 to 2200 rpm range, with full power from 178 rpm through a 3 speed hydraulic gear shift, is Mazak's statement about the series. The model table on this page is for a Ø181 mm (7.1 in) spindle bore, which matches the optional Ø7.13" bore of the series description, and it lists 1,000 rpm. Use the table figure for a machine with this bore.
Both have a bore of about the same size, but they are different machines. The SLANT TURN 500 has a Ø7 in (178 mm) bore, turns Ø36 in (914 mm), runs to 1,600 rpm, lists 41 in (1,041 mm) of turning length and weighs 30,423 lb (13,800 kg). This model turns Ø23 in (584 mm) by 76 in (1,930 mm) at up to 1,000 rpm and weighs 14,771 lb (6,700 kg): longer and narrower work on a much lighter machine.
The table lists an MT No.5 tailstock with a 5 in (127 mm) stroke. Mazak's description of the TURNING CENTER M-5 series adds 14 permanently set tools, a front octagonal disc turret with a 9.92" coupling and a tailstock with a 3.94" diameter quill and a maximum thrust of 14700 N (1500 kgf).
