The Mazak VARIAXIS j-500/5X is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 12,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak VARIAXIS j-500/5X: simultaneous 5-axis trunnion machining center, Ø19.69 in (500 mm) table, 12,000 rpm, 7.5 kW (10 HP) continuous.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 7.5 kW |
| Spindle Taper Interface | CAT No.40 |
| Table / Platter / Chuck Size | Ø19.69 in (500 mm) × 15.75 in (400 mm) |
| Max Table Load Capacity | 441 kg |
| Automatic Tool Changer (ATC) | 18 Tool Stations |
| Approx. Machine Weight | 15,432 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | Ø19.69 in (500 mm) × 15.75 in (400 mm) |
| Max Workpiece Size | Ø19.69 in (500 mm) × 13.78 in (350 mm) |
| Max Table Load | 441 lb (200 kg) |
| Spindle Taper | CAT No.40 |
| Max Spindle Speed | 12,000 rpm |
| Spindle Torque Intermittent | 48 ft-lb (65 Nm) (40% ED) |
| Spindle Torque | 35 ft-lb (47 Nm) continuous |
| Spindle Power Intermittent | 11 kW (15 HP) (40% ED) |
| Spindle Motor Power | 7.5 kW (10 HP) continuous |
| Tool Capacity | 18 tools |
| Max Tool Diameter | Ø4 in (102 mm) |
| Max Tool Diameter Adjacent Empty | Ø5 in (127 mm) |
| Max Tool Length | 12 in (305 mm) |
| Max Tool Weight | 18 lb (8 kg) |
| X-Axis Travel | 14 in (356 mm) |
| Y-Axis Travel | 22 in (559 mm) |
| Z-Axis Travel | 20 in (508 mm) |
| A Axis Range | -120° - +30° |
| Spindle Nose To Table | 2 in (51 mm) to 22 in (559 mm) |
| Rapid Traverse X | 1,181 ipm (30 m/min) |
| Rapid Traverse Y | 1,181 ipm (30 m/min) |
| Rapid Traverse Z | 1,181 ipm (30 m/min) |
| Footprint | 101 in (2,565 mm) × 127 in (3,226 mm) (W × L, MAZATROL SmoothX) |
| Machine Height | 112 in (2,845 mm) |
| Machine Weight | 15,432 lb (7,000 kg) |
Our best estimate for the Mazak VARIAXIS j-500/5X is $200,000 - $275,000. This is an estimate for a 5-axis machining centers in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-variaxis-j-500-5x#price; the request is passed to Yamazaki Mazak or an authorised dealer.
Simultaneous 5-axis control. Mazak lists the VARIAXIS j-500/5X for three-dimensional curved surface machining, while the VARIAXIS j-500 is described as simultaneous 4-axis plus A-axis indexing for multiple-surface machining. The headline figures of the two are the same: 12,000 rpm, 7.5 kW (10 HP) continuous, 18 tools and a 441 lb (200 kg) table load.
The CAT No.40 spindle reaches 12,000 rpm and is rated 7.5 kW (10 HP) continuous and 11 kW (15 HP) at 40% ED. Torque is 35 ft-lb (47 Nm) continuous and 48 ft-lb (65 Nm) at 40% ED. Mazak lists a high speed spindle as an option for the VARIAXIS j series.
Mazak describes MAZA-CHECK for the VARIAXIS j series: position misalignment and incline of the rotary axis are measured and compensated automatically, including angular deviation in the tilt direction. The RMP600 wireless touch probe is optional equipment. Ai Thermal Shield suppresses changes in the cutting edge position, and the X, Y and Z axes run on linear roller guides.
Up to Ø19.69 in (500 mm) × 13.78 in (350 mm) and 441 lb (200 kg). The table tilts from -120° to +30° and the travels are 14 in (356 mm), 22 in (559 mm) and 20 in (508 mm) in X, Y and Z. Tools may be up to Ø4 in (102 mm), or Ø5 in (127 mm) with adjacent pockets empty, and 18 lb (8 kg).
