The Mazak VCC-2000 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the MAZATROL SmoothG CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak VCC-2000, not in the current lineup: 50-taper VMC listed at 2,000 × 1,000 × 700 mm travels, 6,000 RPM, 550 Nm (406 ft-lb) at 25% ED.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | MAZATROL SmoothG CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | CAT 50 (HSK-A100 optional) |
| Table / Platter / Chuck Size | 2,200 x 1,000 mm (86.6 x 39.4 in) |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Approx. Machine Weight | 30,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 2,000 mm (78.7 in) |
| Y-Axis Travel | 1,000 mm (39.4 in) |
| Z-Axis Travel | 700 mm (27.6 in) |
| Max Spindle Speed | 6,000 RPM (15,000 RPM optional) |
| Spindle Taper | CAT 50 (HSK-A100 optional) |
| Spindle Motor Power | 22 kW (30 hp) at 25% ED |
| Spindle Torque | 550 Nm (406 ft-lb) at 25% ED |
| Table Size | 2,200 x 1,000 mm (86.6 x 39.4 in) |
| Max Workpiece Weight | 3,000 kg (6,614 lb) |
| Rapid Traverse X | 24 m/min (945 ipm) |
| Rapid Traverse Yz | 24 m/min (945 ipm) |
| Tool Capacity | 40 tools standard (80 optional) |
| Through Spindle Coolant | Optional (70 bar) |
| Machine Weight | 30,000 kg (66,139 lb) |
| CNC Control | MAZATROL SmoothG CNC |
Our best estimate for the Mazak VCC-2000 is $500,000 - $800,000. This is an estimate for a vertical machining centers (vmc) in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-vcc-2000#price; the request is passed to Yamazaki Mazak or an authorised dealer.
It is not in Mazak's current lineup. For a used machine, confirm the spindle first: the listed table shows a 6,000 RPM CAT 50 spindle as standard, with a 15,000 RPM spindle and an HSK-A100 taper as options, and those are very different machines to own.
Listed travels are 2,000 mm (78.7 in) in X, 1,000 mm (39.4 in) in Y and 700 mm (27.6 in) in Z. The table is 2,200 x 1,000 mm (86.6 x 39.4 in) and the maximum workpiece weight is 3,000 kg (6,614 lb).
The listed figure is 550 Nm (406 ft-lb) at 25% ED, with 22 kW (30 hp) at 25% ED, on the 6,000 RPM CAT 50 spindle. Both are short-time ratings. No continuous power or torque is listed, so long roughing cuts should be planned with a margin.
Only as an option. The listed table gives through-spindle coolant as optional at 70 bar, so a given machine may or may not have it. Check for the pump and rotary union on the machine itself, since deep drilling with long 50-taper tools depends on it.
The FJV-35/80 has the same X travel, 78.74 in (2,000 mm), and the same load limit, 6,614 lb (3,000 kg), with 31.5 in (800 mm) of Y and 25.98 in (660 mm) of Z. The VCC-2000 is listed with 1,000 mm (39.4 in) of Y and 700 mm (27.6 in) of Z. The FJV-35/80 runs to 10,000 rpm, where the standard VCC-2000 spindle is listed at 6,000 RPM. Their torque figures are on different ratings and should not be set side by side.
