The Mazak VCE-700 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the MAZATROL SmoothG CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak VCE-700, not in the current lineup: box-way 40-taper VMC listed at 1,270 × 700 × 560 mm travels, 12,000 RPM, 1,500 kg table load.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | MAZATROL SmoothG CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 18.5 kW |
| Spindle Taper Interface | CAT 40 (BT 40 optional) |
| Table / Platter / Chuck Size | 1,400 x 700 mm (55.1 x 27.6 in) |
| Max Table Load Capacity | 1,500 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 8,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 1,270 mm (50 in) |
| Y-Axis Travel | 700 mm (27.6 in) |
| Z-Axis Travel | 560 mm (22 in) |
| Table Size | 1,400 x 700 mm (55.1 x 27.6 in) |
| Max Table Load | 1,500 kg (3,307 lb) |
| Spindle Speed | 12,000 RPM (15,000 / 20,000 RPM optional) |
| Spindle Motor Power | 18.5 kW (25 hp) |
| Spindle Taper | CAT 40 (BT 40 optional) |
| Tool Capacity | 30 tools (48 or 60 optional) |
| Rapid Traverse Xyz | 36 m/min (1,417 ipm) |
| Through Spindle Coolant | 20 bar (70 bar optional) |
| Guideway Type | Box ways |
| Machine Weight | 8,500 kg (18,739 lb) |
| CNC Control | MAZATROL SmoothG CNC |
Our best estimate for the Mazak VCE-700 is $160,000 - $260,000. This is an estimate for a vertical machining centers (vmc) in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-vce-700#price; the request is passed to Yamazaki Mazak or an authorised dealer.
The listed guideway type is box ways. The listed rapid traverse is 36 m/min (1,417 ipm) on X, Y and Z. On a used machine, inspect the way surfaces and the lubrication system, because sliding ways depend on both.
Listed travels are 1,270 mm (50 in) in X, 700 mm (27.6 in) in Y and 560 mm (22 in) in Z. The table is 1,400 x 700 mm (55.1 x 27.6 in) and the maximum table load is 1,500 kg (3,307 lb).
The listed spindle is 12,000 RPM at 18.5 kW (25 hp), with 15,000 and 20,000 RPM spindles as options. The taper is CAT 40, with BT 40 optional. The table gives no duty rating and no torque for any of them.
The listed magazine holds 30 tools, and 48 or 60 tools are listed as options. Because the magazine was optional equipment, count the pockets on the machine being considered and do not assume the larger size.
The listed through-spindle coolant is 20 bar, with 70 bar as an option. Check which pump is fitted on a used machine, since drilling deep holes with small through-coolant tools depends on the higher pressure.
