The Mazak VCN-535C is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the MAZATROL SmoothG. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak VCN-535C: BT 50 vertical machining center, listed at 10,000 RPM and 30 kW (40 hp) with 1,050 x 530 x 510 mm travels. Not in the current lineup.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | MAZATROL SmoothG |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 30.0 kW |
| Spindle Taper Interface | BT 50 |
| Table / Platter / Chuck Size | 1,300 x 550 mm (51.2 x 21.7 in) |
| Max Table Load Capacity | 1,500 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 7,800 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 1,050 mm (41.3 in) |
| Y-Axis Travel | 530 mm (20.9 in) |
| Z-Axis Travel | 510 mm (20.1 in) |
| Max Spindle Speed | 10,000 RPM |
| Spindle Taper | BT 50 |
| Spindle Motor Power | 30 kW (40 hp) |
| Tool Capacity | 30 (arm-type ATC); 48 optional |
| Table Size | 1,300 x 550 mm (51.2 x 21.7 in) |
| Max Table Load | 1,500 kg (3,307 lb) |
| Rapid Traverse | 36 m/min (1,417 ipm) |
| Tool To Tool | 2.0 sec |
| Machine Weight | 7,800 kg (17,196 lb) |
| CNC Control | MAZATROL SmoothG |
| Guide Type | Linear roller guides (all axes) |
| Footprint | 2,870 x 2,819 mm (113 x 111 in) |
Our best estimate for the Mazak VCN-535C is $155,000 - $200,000. This is an estimate for a vertical machining centers (vmc) in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-vcn-535c#price; the request is passed to Yamazaki Mazak or an authorised dealer.
The listed spindle is BT 50 at 10,000 RPM and 30 kW (40 hp). The larger taper holds big face mills, long boring bars and large drills more rigidly than a smaller taper would, at the cost of heavier tools and a slower change, listed at 2.0 sec tool to tool. No torque figure is listed, so ask for the spindle output chart before planning heavy roughing.
It is not in Mazak's current lineup and may be an older model. Anyone assessing a second-hand VCN-535C should confirm the listed 1,050 mm (41.3 in), 530 mm (20.9 in) and 510 mm (20.1 in) travels, the 30 or 48 tool magazine and the spindle data from the machine's nameplate and manual.
The listed table load is 1,500 kg (3,307 lb) on a table of 1,300 x 550 mm (51.2 x 21.7 in). The table is longer than the 1,050 mm (41.3 in) X travel, so part of its length is clamping room. Count the fixture, any rotary table and the part together against the load limit.
The listed footprint is 2,870 x 2,819 mm (113 x 111 in) and the listed weight is 7,800 kg (17,196 lb). Allow extra room around the footprint for the doors, the tool magazine and chip removal, and check the floor for the machine weight plus the 1,500 kg (3,307 lb) maximum table load.
